Skip to content
Elevate PVC Split Pipe Boot, Factory-Fabricated KEE Membrane Flashing for 1 in. to 5 in. Pipe Penetrations, White
Regular price $33.75Orders start at $399 — combine any items to reach the minimum. Learn more
Elevate PVC Split Pipe Boot, Factory-Fabricated KEE Membrane Flashing for 1 in. to 5 in. Pipe Penetrations, White
This Elevate PVC Split Pipe Boot is a factory-fabricated flashing made from white Elevate PVC with DuPont Elvaloy KEE roofing membrane, sized for round penetrations from 1 in. to 5 in. One sell unit is a single piece, offered in 1-2 in. and 3-5 in. pipe sizes. The split tab design flashes pipes with limited or no access from above.
Key Features:
- Factory fabricated: Pre-made boot eliminates the need to field fabricate from PVC unsupported flashing.
- Split tab design: Splits around the pipe so it can be installed with limited or no access from above the penetration.
- Wide pipe range: Designed to flash round penetrations from 1 in. to 12 in. (25 mm to 305 mm) across the line.
- KEE membrane material: Made from high performance Elevate PVC with DuPont Elvaloy KEE roofing membrane.
- Faster details: Reduces labor on pipe details while increasing the performance of the detail and system.
- Heat weldable: Welds into the surrounding PVC KEE membrane field for a monolithic flashing.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 piece |
| Product line | Elevate PVC (DuPont Elvaloy KEE) |
| Available colors | White (line also made in tan and gray) |
| Available sizes | 1 in. to 2 in. pipe and 3 in. to 5 in. pipe |
| Material | PVC with DuPont Elvaloy KEE roofing membrane |
| Dimensions | Fits round pipe penetrations 1 in. to 5 in. |
| Pack quantity | 1 piece |
| Intended use | Flashing round pipe penetrations on PVC roofing systems |
Fit and Compatibility:
Made for Elevate PVC KEE roofing systems and heat-welds to matching Elevate PVC field membrane and unsupported flashing; select the boot size to the pipe diameter, and larger pipe sizes up to 12 in. are covered elsewhere in the line.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One split pipe boot; choose the 1-2 in. or 3-5 in. pipe size, white.
Q: How do I size the boot?
A: Match the boot range to the outside pipe diameter: 1-2 in. for small pipes, 3-5 in. for larger pipes.
Q: Can I install it around an existing pipe?
A: Yes, the split tab design wraps the pipe even where there is limited or no access from above.
Q: How is it attached?
A: It is heat welded to the field membrane and termination at the pipe, following Elevate detail instructions.
Q: Is it available in colors besides white?
A: The manufacturer makes these boots in white, tan and gray; this page lists white variants.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Factory boots beat field-cut unsupported flashing for speed and consistency, so stock both common sizes before the roof phase begins. Measure the pipe outer diameter first, since a boot stretched too far or too loose will not weld cleanly. Pair with matching-color membrane when color-matched details matter.
Heat-weld seams only per the membrane manufacturer's instructions; welding tools and cut flashing edges can cause burns and cuts.
Order Elevate PVC split pipe boots to flash your pipe penetrations faster.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
