Skip to content
Elevate PVC Max Reinforced Membrane Flashing, 60 Mil Tan, 30 in. x 100 ft Roll
Regular price $830.00Elevate PVC Max Reinforced Membrane Flashing, 60 Mil Tan, 30 in. x 100 ft Roll
Elevate PVC Max is a flexible reinforced PVC membrane flashing for low-slope roofing, produced with polyester weft-inserted reinforcement and meeting or exceeding ASTM D 4434, Type III. This variant is 60 mil (1.52 mm) thick, 30 in. wide and 100 ft long in Tan, sold as one roll. It is heat weldable and may be adhered, mechanically fastened or induction welded.
Key Features:
- Reinforced PVC: Flexible thermoplastic polyvinyl chloride membrane with polyester weft-inserted reinforcement.
- ASTM compliant: Meets or exceeds all requirements for ASTM D 4434, Type III specification.
- Heat weldable: Heat weldable for secure seams at flashings, walls, curbs and penetrations.
- 60 mil thickness: Available in 50, 60 and 80 mil thicknesses; this roll is 60 mil (1.52 mm).
- Versatile attachment: May be adhered, mechanically fastened or Induction Welded to an appropriate substrate.
- 100 ft roll: Supplied as a 30 in. x 100 ft roll for continuous flashing runs.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 roll, 30 in. x 100 ft (60 mil) |
| Product line | Elevate MAX PVC Reinforced Membrane Flashing |
| Available colors | Tan (this variant); other line colors not listed |
| Available sizes | 50 mil, 60 mil, 80 mil thicknesses; 10 in. or 30 in. widths (line range); this item: 60 mil x 30 in. x 100 ft |
| Material | Thermoplastic PVC membrane with polyester weft-inserted reinforcement |
| Color / finish | Tan |
| Thickness | 60 mil (1.52 mm) |
| Width | 30 in. (762 mm) |
| Length | 100 ft |
| Approvals | Meets or exceeds ASTM D 4434, Type III |
| Intended use | Low-slope roof flashing for walls, curbs, penetrations and perimeter details |
| Pack quantity | 1 roll |
Coverage & How Much You Need:
One roll provides a 30 in. wide strip 100 ft long, covering up to 250 sq ft of flashing area before seam allowance. Plan field seams and laps per your Elevate system details when sizing quantities.
Fit and Compatibility:
Part of the Elevate MAX PVC membrane system for low-slope roofs; attachment by adhering, mechanical fastening or induction welding per Elevate details. Primers, adhesives, termination bars and welding equipment are required accessories and are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One roll of 60 mil Tan PVC Max reinforced flashing, 30 in. x 100 ft.
Q: What thicknesses are available?
A: The line is available in 50 mil, 60 mil and 80 mil; this item is 60 mil (1.52 mm).
Q: Is it heat weldable?
A: Yes, it is a heat weldable PVC flashing membrane.
Q: How can it be attached?
A: It may be adhered, mechanically fastened, or Induction Welded to an appropriate substrate.
Q: Does it meet a standard?
A: It meets or exceeds all requirements of the ASTM D 4434, Type III specification.
Q: How much area does a roll cover?
A: A 30 in. x 100 ft roll yields up to about 250 sq ft of flashing strip before laps and seams.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Choose 60 mil for most wall, curb and penetration flashing where moderate traffic and puncture exposure are expected; step up to 80 mil in high-wear areas. Strip-in details with hot-air welding and verify seam integrity per Elevate application instructions. Match flashing thickness and attachment method to the field membrane spec so the warranty detail requirements stay intact.
Hot-air welding creates very hot surfaces and fume conditions; wear heat-resistant gloves and eye protection and follow the membrane manufacturer's safety guidance.
Order the Elevate PVC Max 60 mil Tan flashing roll for your low-slope roof details.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
