Skip to content
Elevate .060 FullForce EPDM SA Membrane with Secure Bond, Black, 50 ft. & 101 ft. Rolls
Regular price $1,384.09Elevate .060 FullForce EPDM SA Membrane with Secure Bond, Black, 50 ft. & 101 ft. Rolls
Elevate .060 FullForce EPDM SA Membrane is a black self-adhered EPDM roofing membrane with factory-applied Secure Bond adhesive for uniform, full-coverage adhesion. Available in 9 ft. 10.5 in. x 50 ft. 7.6 in. and 9 ft. 10.5 in. x 101 ft. 3.6 in. rolls, sold per roll, for fully adhered EPDM roofing systems.
Key Features:
- Secure Bond tech: Secure Bond adhesive is factory applied, ensuring uniform adhesion across the entire membrane, even through the seam.
- Wide install window: Can be installed from 20 to 120 degrees F, widening the installation window over traditional fully adhered applications.
- Faster installation: Improves installation speed compared with traditional fully adhered applications.
- No VOCs: No VOCs are emitted during field membrane application.
- .060 EPDM: 60-mil black EPDM membrane in two roll lengths.
- Powerful bond: Creates a powerful bond with the substrate and overlapping seam area.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Elevate |
| Sell unit | 1 roll |
| Product line | Elevate FullForce EPDM with Secure Bond technology |
| Available colors | Black |
| Available sizes | 9 ft. 10.5 in. x 50 ft. 7.6 in. roll and 9 ft. 10.5 in. x 101 ft. 3.6 in. roll |
| Material | EPDM membrane with factory-applied Secure Bond adhesive |
| Thickness | .060 in. (60 mil) |
| Color / finish | Black |
| Dimensions | Rolls 9 ft. 10.5 in. wide x 50 ft. 7.6 in. or 101 ft. 3.6 in. long |
| Install temperature | 20 to 120 degrees F (membrane, substrate and ambient above 20 degrees F and rising) |
| Intended use | Self-adhered fully adhered EPDM roof systems |
Coverage & How Much You Need:
The 101 ft. 3.6 in. roll covers roughly 1,000 sq. ft. and the 50 ft. 7.6 in. roll roughly 500 sq. ft. of roof area before seam laps; follow the specified seam overlaps and allow each roll to relax at least 30 minutes before final positioning and adhering.
Fit and Compatibility:
A fully adhered self-adhered system for EPDM roof assemblies; all membrane and flashing splices require seam edge treatment using FullForce sealant. Primers, sealants, terminations and flashing accessories are sold separately, and the membrane must not be installed below 20 degrees F.
Frequently Asked Questions (FAQ):
Q: What roll sizes are available?
A: 9 ft. 10.5 in. x 50 ft. 7.6 in. and 9 ft. 10.5 in. x 101 ft. 3.6 in., both black .060 EPDM, sold per roll.
Q: How does Secure Bond work?
A: The adhesive is factory applied, so adhesion is uniform across the entire membrane, including through the seam, bonding powerfully to the substrate and the overlap area.
Q: What temperature range can it be installed in?
A: It can be installed from 20 to 120 degrees F; do not install when membrane, substrate and ambient temperatures are at or below 20 degrees F.
Q: How should it be prepared?
A: Unroll and position the membrane for the specified alignment and seam overlaps, and let it relax a minimum of 30 minutes before final positioning and adhering.
Q: Are VOCs emitted?
A: No VOCs are emitted during field membrane application.
Q: What is needed at the seams?
A: All membrane and flashing splices require seam edge treatment applied with FullForce sealant.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
FullForce eliminates the bucket-and-roller step of a fully adhered job, so most of the labor saving comes on large open fields; use the longer 101 ft. roll there and the 50 ft. roll on smaller or cut-up roofs. Respect the 30-minute relaxation period to avoid wrinkles, and never install below 20 degrees F. Budget FullForce sealant for every splice edge and verify substrate compatibility before starting.
Do not install when membrane, substrate or ambient temperature is below 20 degrees F, and follow roof-top fall-protection and safe-lifting practices when handling heavy rolls.
Order Elevate .060 FullForce EPDM SA Membrane for faster, uniform self-adhered roofing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
