Skip to content
Duro-Last Galvalume Metal Cleat Plates - 2-3/8 in., 1000 per Box
Regular price $638.65Duro-Last Galvalume Metal Cleat Plates - 2-3/8 in., 1000 per Box
Duro-Last Metal Cleat Plates are 2-3/8 in. diameter, 0.035 in. thick Galvalume plates sold 1,000 per box. Each plate is stamped with a recessed 0.265 in. center hole and ribs for added strength, and the rib/hole configuration keeps the screw head from contacting the Duro-Last roofing membrane. Sold in a mill finish box of 1,000.
Key Features:
- Durable Galvalume: Made of 0.035 in. thick Galvalume steel with proven weatherability and resiliency.
- 2-3/8 in. diameter: Full-size 60.3 mm plate for even load distribution.
- Recessed center hole: Stamped with a recessed 0.265 in. diameter hole in the center.
- Ribbed strength: A series of ribs adds strength to the stamped plate.
- Protects membrane: Rib and hole configuration prevents the screw head from contacting the Duro-Last membrane.
- Bulk packaging: Packaged and sold in quantities of 1,000 per box.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Duro-Last |
| Sell unit | 1 box of 1,000 plates |
| Product line | Duro-Last Cleat Plate |
| Available colors | Mill |
| Available sizes | 2-3/8 in. diameter, 1,000 count box |
| Material | Galvalume steel |
| Finish / texture | Galvalume (mill) |
| Dimensions | 2-3/8 in. (60.3 mm) diameter, 0.035 in. (0.9 mm) thick |
| Pack quantity | 1,000 plates per box |
| Intended use | Cleat plates for membrane fastening with Duro-Last roofing systems |
Coverage & How Much You Need:
One box supplies 1,000 cleat plates for 1,000 fastening points; the number of plates required is set by the fastening pattern in the Duro-Last detail being installed (e.g., edge or cleat terminations).
Fit and Compatibility:
Intended for use with Duro-Last roofing membrane systems and compatible screws; the recessed hole design keeps the screw head off the membrane. Confirm fastener type and length per the specific Duro-Last installation detail.
Frequently Asked Questions (FAQ):
Q: What is the plate size and thickness?
A: Each plate is 2-3/8 in. (60.3 mm) in diameter and 0.035 in. (0.9 mm) thick.
Q: How many plates are in a box?
A: Cleat Plates are packaged and sold in quantities of 1,000.
Q: What keeps the membrane from being damaged?
A: The recessed 0.265 in. center hole and rib configuration prevent the screw head from contacting the membrane.
Q: What material are the plates?
A: Galvalume-coated steel with proven weatherability and resiliency.
Q: Are these compatible with non-Duro-Last membranes?
A: They are offered by Duro-Last for its roofing systems; verify suitability with the membrane manufacturer before using elsewhere.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use cleat plates wherever a metal edge or cleat must be mechanically captured, since the recessed hole keeps the screw head clear of the membrane and reduces puncture risk. The 0.035 in. Galvalume stock resists corrosion in typical low-slope service. Keep plates dry in storage so mill finish stays clean before installation.
Wear gloves when handling stamped steel plates; edges and burrs can cut skin, and self-drilling screws require eye protection.
Order the Duro-Last 2-3/8 in. Galvalume cleat plates in the 1,000-count box for your next membrane attachment.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
