Skip to content
Dryvit Systems Standard Plus Mesh 6 oz Reinforcing Mesh, 48 in. x 150 ft. Roll
Regular price $308.65Orders start at $399 — combine any items to reach the minimum. Learn more
Dryvit Systems Standard Plus Mesh 6 oz Reinforcing Mesh, 48 in. x 150 ft. Roll
Dryvit Systems Standard Plus Mesh is a heavier 6 oz glass fiber reinforcing mesh on a 48 in. x 150 ft. roll, used where greater impact resistance is required. Embed it in Dryvit base coat to stiffen and reinforce EIFS and stucco walls. One roll is the sell unit.
Key Features:
- Heavy-duty mesh: 6 oz/sq yd weight offers higher impact resistance than standard 4.3 oz mesh.
- Reinforcing performance: Encapsulated in base coat to strengthen EIFS and stucco assemblies against cracking.
- 48 in. width: Wide roll spans typical wall heights with minimal seaming.
- 150 ft roll: Long 150 ft roll reduces joints on extended runs.
- Dryvit system matched: Manufactured by Tremco Construction Products Group for Dryvit systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Dryvit Systems |
| Sell unit | 1 roll, 48 in. x 150 ft. |
| Product line | Dryvit Systems Standard Plus Mesh |
| Available sizes | 48 in. x 150 ft. roll, 6 oz |
| Material | Glass fiber reinforcing mesh |
| Dimensions | 48 in. x 150 ft. per roll |
| Mesh weight | 6 oz |
| Coverage per unit | Up to 600 sq ft per roll before overlap allowances |
| Intended use | Impact-resistant reinforcement embedded in Dryvit base coat |
| Manufacturer | Tremco Construction Products Group (CPG) |
Coverage & How Much You Need:
Each 48 in. x 150 ft. roll contains 600 sq ft of mesh; subtract material used for seam laps and edge wraps when estimating coverage for the job.
Fit and Compatibility:
For use with Dryvit cementitious base coats such as Primus DM. Pairs with standard 4.3 oz Dryvit mesh, which can be used in less exposed areas of the same wall.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One roll of 6 oz Dryvit Standard Plus Mesh, 48 in. x 150 ft. Base coat is sold separately.
Q: When should I use Standard Plus instead of Standard Mesh?
A: Choose Standard Plus 6 oz where greater impact resistance is needed, such as lower wall areas subject to contact.
Q: How is it installed?
A: Bed the mesh into wet base coat so it is fully encapsulated, then apply a top skim of base coat to cover it.
Q: How much does a roll cover?
A: The roll is 600 sq ft of fabric; allow for lap overlaps at seams in your estimate.
Q: Does it come in other weights?
A: Yes, Dryvit also offers Standard Mesh at 4.3 oz for standard applications.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Specify 6 oz Standard Plus mesh at impact zones and keep 4.3 oz for field areas to balance cost and durability. Keep mesh flat and tensioned as you embed it, and lap seams 2 to 3 inches so cracks cannot follow the joint. Do not leave mesh exposed to UV before coating.
Glass fiber strands can irritate skin and lungs; wear gloves, long sleeves and eye protection when cutting and handling mesh.
Order the Dryvit Systems Standard Plus 6 oz mesh roll for impact-resistant EIFS reinforcement.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
