Skip to content
DCI FasciaVent 10-1/2 in. x 36 in. Fascia Intake Vent
Regular price $22.70Orders start at $399 — combine any items to reach the minimum. Learn more
DCI FasciaVent 10-1/2 in. x 36 in. Fascia Intake Vent
The DCI FasciaVent is a 10-1/2 in. x 36 in. fascia intake vent that lets cooler air enter through the fascia board, travel under the roof decking, and exit through the ridge vent or other exhaust. It is ideal for roofs under 4/12 pitch, and one piece is included per order. Gutters can be installed directly onto it.
Key Features:
- Fascia Intake Airflow: Allows air to enter through the fascia board, under the roof decking and out the ridge vent or other installed exhaust device.
- Low-Slope Friendly: Ideal for roofs that are less than 4/12 pitch.
- Gutter Compatible: Your gutter can be installed directly onto FasciaVent.
- High NFA Rating: NFA rating of 9 square inches per linear foot.
- Reduces Panel Lift: Reduces the roof top lift-up that hinders long rigid metal panel installations.
- Versatile Roofing Use: For use on asphalt or metal roofing, installed prior to shingle or panel installation.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | DCI |
| Sell unit | 1 piece (10-1/2 in. x 36 in.) |
| Product line | FasciaVent |
| Nominal size | 10-1/2 in. x 36 in. |
| Dimensions | 10-1/2 in. x 36 in. |
| Wind / fire / impact rating as printed | NFA rating of 9 square inches per linear foot |
| Intended use | Fascia intake ventilation for asphalt or metal roofing |
Coverage & How Much You Need:
Each 36 in. piece provides 9 square inches of net free area per linear foot, or 27 sq in. of NFA per piece. Measure the fascia intake run and divide by 3 ft to size the number of pieces.
Fit and Compatibility:
Designed for asphalt and metal roofing and works with a ridge vent or other exhaust apparatus to complete the ventilation system. Gutters install directly onto FasciaVent. Exhaust vents and gutters are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One FasciaVent piece measuring 10-1/2 in. x 36 in.
Q: What roofs is it for?
A: It is ideal for roofs less than 4/12 pitch and can be used on asphalt or metal roofing.
Q: How much ventilation does it provide?
A: FasciaVent has an NFA rating of 9 square inches per linear foot.
Q: Can I attach a gutter to it?
A: Yes, a gutter can be installed directly onto FasciaVent.
Q: When is it installed?
A: It is easily installed prior to roof shingle or panel installation.
Q: Does it work with metal panels?
A: Yes, and it reduces the roof top lift-up that hinders long rigid metal panel installations.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
FasciaVent is a strong choice for low-slope roofs where ridge intake is impractical; balance it with adequate exhaust NFA for proper airflow. Install it before shingles or metal panels go on, and plan gutter attachment so the gutter sits directly on the vent. On long metal panel runs its lift-up reduction is a real benefit.
Install FasciaVent before roofing proceeds and follow DCI instructions and local codes; use fall protection when working at the eaves.
Add DCI FasciaVent to your low-slope roof project for effective eave-level intake ventilation.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
