DAP Global Inc DAP Premium Polyurethane Construction Adhesive Sealant, Black, 10.1 fl. oz. Cartridge

This is DAP's Premium Polyurethane Construction Adhesive Sealant in black, a one-part, moisture-curing, non-sag elastomeric sealant supplied in a 10.1 fl. oz. cartridge. It is formulated for long-lasting, durable sealing of exterior gaps, joints and cracks, applied with a standard caulking gun. One cartridge is the sell unit.

Key Features:

• Commercial-grade seal: A one-part, moisture-curing, non-sag elastomeric commercial-grade sealant for exterior gaps, joints and cracks.
• Flexible joints: Remains flexible to withstand up to +/-35% joint movement when installed in a properly prepared joint.
• Superior adhesion: Offers superior adhesion to most substrates including aluminum, asphalt, fiberglass, brick, masonry, metal, plastic, stone, stucco, vinyl and wood.
• Traffic rated: Exceptional cut and tear resistance; handles foot and vehicle traffic.
• Paintable finish: Paintable after curing for a finished look on visible joints.
• Meets standards: Meets or exceeds ASTM C920, Type S, Grade NS, Class 35, Use T, NT, O, M, I, plus CAN/CGSB 19.13-M87 and Federal Specification TT-S-00230C, Type II, Class A.
• Indoor/outdoor: Suitable for both interior and exterior use.

Specifications Table:

Coverage & How Much You Need:

Per the specification data, one 10.1 fl. oz. cartridge covers approximately 12.4 ft. Size your job by the length of the joint or crack to be sealed, allowing for joint width and depth.

Fit and Compatibility:

Applies with a standard caulking gun and adheres to aluminum, asphalt, fiberglass, brick, masonry, metal, plastic, stone, stucco, vinyl and wood. Paintable after curing. Available from DAP in White, Gray and Black in the same 10.1 fl. oz. size if a different color is needed.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One 10.1 fl. oz. black cartridge of DAP Premium Polyurethane Construction Adhesive Sealant.

Q: How do I apply it?
A: Cut the cartridge tip, load into a caulking gun, and apply into a properly prepared joint; it is non-sag and can be tooled in place.

Q: How long does it take to cure?
A: Full cure takes approximately 4 to 7 days; it is a moisture-curing, one-part formula.

Q: Can I paint over it?
A: Yes, the sealant is paintable.

Q: What surfaces does it stick to?
A: It has excellent adhesion to aluminum, asphalt, fiberglass, brick, masonry, metal, plastic, stone, stucco, vinyl and wood.

Q: Is it suitable for driveways or walkways?
A: Yes, it is rated to handle foot and vehicle traffic and resists cut and impact.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Choose this polyurethane sealant when you need a durable, flexible seal on exterior joints subject to movement, such as concrete, masonry, stucco and siding transitions. Properly prepare and size the joint, then tool the bead for full contact on both sides. For above-grade joints you expect to paint, this black cartridge can be overcoated once fully cured after 4 to 7 days.

Polyurethane sealants contain isocyanates and solvents; apply in a well-ventilated area with gloves and eye protection and review the SDS before use.

Order the DAP Premium Polyurethane Construction Adhesive Sealant in black for a durable, flexible, commercial-grade joint seal.