Skip to content
Cor-A-Vent VC-600cs Ridge Vent 8-1/2 in. Exhaust Ventilation
Regular price $19.75Orders start at $399 — combine any items to reach the minimum. Learn more
Cor-A-Vent VC-600cs Ridge Vent 8-1/2 in. Exhaust Ventilation
This is the Cor-A-Vent VC-600cs ridge vent, an 8-1/2 inch shingle-over ridge exhaust vent for sloped roofs. Each order unit is one piece. It installs along the roof ridge to exhaust warm, moist attic air and pairs with intake ventilation at the eaves.
Key Features:
- Shingle-over design: The 8-1/2 in. ridge vent is covered with cap shingles after installation for a low-profile finished ridge.
- Exhaust ventilation: Designed as a roof exhaust vent that lets attic air escape at the ridge.
- Workable section: Sold per piece so you can order the linear footage your ridge requires.
- Low profile: Sits along the ridge line with minimal visual impact on the finished roof.
- Trusted brand: Manufactured by Cor-A-Vent Inc, a specialized roof ventilation manufacturer.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Cor-A-Vent |
| Sell unit | 1 piece |
| Product line | Coravent VC-600cs Ridge Vent |
| Available sizes | 8-1/2 in. ridge |
| Dimensions | 8-1/2 in. ridge height profile |
| Material | Roof ventilation product |
| Nominal size | 8-1/2 in. |
| Intended use | Ridge exhaust ventilation for sloped shingle roofs |
| Pack quantity | 1 piece |
Coverage & How Much You Need:
Sold by the piece; measure the linear feet of open ridge and order enough vent pieces to run from ridge end to end, following the manufacturer's coverage spacing.
Fit and Compatibility:
Use with Cor-A-Vent or comparable intake venting at the eaves or soffits for balanced attic ventilation. Appropriate for shingle-over installation on pitched roofs; verify compatibility with your roofing system before ordering.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One piece (PC) of Cor-A-Vent VC-600cs ridge vent, item number 8-1/2 in. ridge.
Q: How much do I need for my roof?
A: Measure the linear footage of your roof ridge and order enough pieces to cover the full length, checking the manufacturer's net free area requirements.
Q: How is it installed?
A: The ridge is cut and the vent is fastened along the ridge, then covered with cap shingles in a shingle-over installation.
Q: Does it work alone?
A: No, a ridge exhaust vent needs matching intake ventilation at the eaves or soffits for proper airflow.
Q: What material is it made of?
A: The sources do not state the specific material; it is listed as a Cor-A-Vent ridge vent product.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The VC-600cs is a shingle-over ridge exhaust vent intended for pitched shingle roofs. Plan the whole ventilation system, not just the exhaust: pair it with adequate soffit or eave intake and follow the manufacturer's net free area guidance for your attic square footage. Order vent by linear footage of open ridge and do not bridge hips or valleys without proper detailing.
Working on a ridge line involves ladder and fall hazards; use appropriate fall protection and follow the manufacturer's installation instructions.
Order the Cor-A-Vent VC-600cs 8-1/2 in. ridge vent to complete your attic exhaust ventilation system.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
