Skip to content
Carlisle SynTec Liquiseal Concrete & Masonry Primer 1/4 Gallon Sachet Translucent/Amber
Regular price $128.91Orders start at $399 — combine any items to reach the minimum. Learn more
Carlisle SynTec Liquiseal Concrete & Masonry Primer 1/4 Gallon Sachet Translucent/Amber
Carlisle SynTec's Liquiseal Concrete & Masonry Primer is a solvent-free, two-part, cold-applied liquid epoxy resin supplied as a 1/4 gallon (0.25 gal, 1 kg) two-component sachet in translucent/amber. Each work pack includes Component A base resin and Component B hardener, covering approximately 19 sq ft. Use it to prime prepared concrete and masonry substrates before applying Liquiseal Liquid Flashing Resin.
Key Features:
- Two-part epoxy: A solvent-free, two-part, cold-applied liquid epoxy resin primer.
- High bonding: A quick-curing, high-bonding primer for acceptable prepared concrete and masonry substrates.
- Low VOC: Solvent-free with a VOC content of 8 g/l.
- Fast cure: Cures in approximately 4 hours at 73°F and 50% relative humidity, with a 20-minute pot life.
- Prep sand system: Broadcast Liquiseal Concrete & Masonry Preparation Sand into uncured primer before the resin goes down.
- Self-contained pack: Component A and Component B mix in the bag, so no separate mixing equipment is required.
- LEED documentation: Manufactured in Buffalo, NY with LEED-related information published by Carlisle.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Carlisle SynTec |
| Sell unit | 1 x 1/4 gallon two-component sachet (0.25 gal / 1 kg) |
| Product line | Liquiseal Liquid Flashing |
| Color | Translucent/Amber |
| Material | Two-part, solvent-free liquid epoxy resin |
| Packaging | 1/4 gallon (0.25 gal / 1 kg) sachet |
| Coverage per unit | 19 sq ft (1.8 sq m) per .25-gallon sachet |
| VOC content | 8 g/l |
| Usage time (pot life) | 20 minutes at 73°F, 50% RH |
| Water resistant after | 3 hours |
| Cures after | 4 hours |
| Apply membrane/coating after | 4 hours |
| Physical state | Cures to solid |
| Shelf life | Approximately 12 months stored at 35-80°F |
| Application temperature | Install between 40°F and 90°F ambient |
| Intended use | Priming concrete and masonry substrates before Liquiseal Liquid Flashing Resin |
| Product weight, complete sell unit | 2 lb |
Coverage & How Much You Need:
One 0.25-gallon sachet covers approximately 19 sq ft (1.8 sq m); actual yield varies with substrate smoothness and absorbency. Divide the concrete or masonry flashing area by 19 sq ft to determine sachet quantity.
Fit and Compatibility:
Designed for use with Carlisle's Liquiseal Liquid Flashing Resin and Liquiseal Liquid Flashing Concrete & Masonry Preparation Sand on prepared concrete and masonry substrates. Do not apply Liquiseal Liquid Flashing Resin over tacky or wet primer; broadcast Preparation Sand into uncured primer at about 50 lbs/100 sq ft and allow roughly 4 hours of cure before the resin.
Frequently Asked Questions (FAQ):
Q: What is included in the sachet?
A: Each two-component work pack includes Component A (translucent yellow base resin) and Component B (hardener) separated inside the bag by a rubber cord.
Q: How do I mix it?
A: Knead Component A until uniform, pull away the separating cord, knead the bag thoroughly for about 1 minute until streak-free, then pour it all into a clean mixing pail and apply immediately.
Q: How much area does one sachet cover?
A: Approximately 19 sq ft per 0.25-gallon sachet, though yield varies with substrate smoothness and absorbency.
Q: When can I apply the flashing resin?
A: After broadcasting Preparation Sand and allowing about 4 hours of cure at 73°F; the resin must only be applied when the primer is completely dry and without tack.
Q: What temperatures are acceptable?
A: Do not install below 40°F or above 90°F ambient; pot life shortens as temperature rises.
Q: How should I store unused sachets?
A: Store in a cool, dry place between 35-80°F out of direct sunlight; shelf life is approximately 12 months, and Carlisle recommends holding at 65-70°F for 24 hours before use.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Prime only clean, dry, fully cured concrete and masonry; grind away irregularities, grease, oil, release agents and loose material before mixing, since the 20-minute pot life leaves no time for prep afterward. Apply the full work pack at once rather than splitting the sachet, roll or brush cross-directionally for single-coat coverage, and broadcast Preparation Sand immediately at about 50 lbs/100 sq ft to give the resin a mechanical key. In warm climates, vapor drive can cause pin-holing, so priming later in the day when temperatures drop helps. Order roughly one sachet per 19 sq ft of flashing detail area.
Wear safety glasses and gloves, avoid eye and skin contact, keep out of reach of children, and never dispose of uncured resin, which is a hazardous material under local, state and federal regulations.
Order the Carlisle SynTec Liquiseal Concrete & Masonry Primer sachet today and prep your concrete details for Liquiseal Liquid Flashing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
