Skip to content
Carlisle Sure-Seal EPDM Uncured ElastoForm Flashing 12 in. x 100 ft. Black 60 Mil PS Roll
Regular price $405.00Carlisle Sure-Seal EPDM Uncured ElastoForm Flashing 12 in. x 100 ft. Black 60 Mil PS Roll
Carlisle Sure-Seal EPDM Pressure-Sensitive ElastoForm Flashing is a nominal 60-mil uncured EPDM membrane with a nominal 30-mil fully cured PS adhesive, supplied as a 12 in. x 100 ft. black roll. Its malleable body conforms to irregular shapes and surfaces for flashing pipes, scuppers, and rooftop penetrations. The 12 in. width includes a center pre-slit release liner.
Key Features:
- 60 Mil Membrane: Nominal 60-mil (1.5 mm) thick uncured EPDM membrane.
- PS Adhesive: Laminated to a nominal 30-mil (0.75 mm) fully cured pressure-sensitive adhesive.
- Malleable Forming: Easily malleable and highly adaptable to irregular shapes and surfaces.
- Self-Curing: Self-curing flashing used on pipes, scuppers, and other rooftop structures and penetrations.
- Pre-Slit Liner: On 12 in.-wide product, the clear poly release liner is pre-slit down the center for easier, partial-liner installation.
- 100 ft. Roll: This item is a 12 in. x 100 ft. black roll; the line is also made in 6 in. x 100 ft., 9 in. x 50 ft., and 12 in. x 50 ft., and in gray 12 in. x 50 ft.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Carlisle |
| Sell unit | 1 roll, 12 in. x 100 ft. |
| Product line | Carlisle Sure-Seal EPDM Pressure-Sensitive ElastoForm Flashing |
| Material | Uncured EPDM membrane with fully cured pressure-sensitive adhesive |
| Color / finish | Black (gray available in the line) |
| Dimensions | 12 in. x 100 ft. (this item) |
| Available colors | Black, Gray |
| Available sizes | Black: 6 in. x 100 ft., 9 in. x 50 ft., 12 in. x 50 ft., 12 in. x 100 ft.; Gray: 12 in. x 50 ft. |
| Membrane thickness | Nominal 60 mil (1.5 mm) |
| Adhesive thickness | Nominal 30 mil (0.75 mm), fully cured PS adhesive |
| Intended use | Flashing pipes, scuppers, and other rooftop structures and penetrations |
| Liner | Clear poly release liner, pre-slit down the center on 12 in.-wide product |
Coverage & How Much You Need:
Each 12 in. x 100 ft. roll provides 100 linear feet of formed flashing strip at 12 in. width. Cut or strip widths as needed for pipe wraps, scuppers, and penetrations, so usable coverage varies with detail layout.
Fit and Compatibility:
Part of the Carlisle Sure-Seal EPDM roofing system and intended for flashing details on EPDM roof assemblies. Use with Carlisle primer and membrane accessories where the system specification calls for them; primers and cleaners are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One roll of black Sure-Seal EPDM Uncured ElastoForm Flashing, 12 in. x 100 ft., with pressure-sensitive adhesive and release liner.
Q: How thick is the flashing?
A: The membrane is nominal 60 mil (1.5 mm) thick with a nominal 30 mil (0.75 mm) pressure-sensitive adhesive layer.
Q: How wide is the roll and is the liner split?
A: This roll is 12 in. wide; its clear poly release liner is pre-slit down the center so you can peel back only half the liner during placement.
Q: What is uncured flashing used for?
A: It is used to flash pipes, scuppers, and other rooftop structures and penetrations where conforming to irregular shapes is required.
Q: What sizes and colors does the line come in?
A: Black is available in 6 in. x 100 ft., 9 in. x 50 ft., 12 in. x 50 ft., and 12 in. x 100 ft.; gray comes in 12 in. x 50 ft.
Q: Is adhesive included?
A: Yes, the fully cured pressure-sensitive adhesive is laminated to the membrane; no separate adhesive is applied to the membrane side.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Uncured ElastoForm is the go-to flashing for odd geometry, pipes, and scuppers where cured flashing cannot conform. Work it into place with a roller, and use the pre-slit liner on 12 in. material to position accurately before committing the adhesive. Use the 6 in. or 9 in. rolls on small pipe details to reduce waste.
Follow EPDM system primer and surface-preparation requirements, and keep solvents and adhesives away from ignition sources during installation.
Order Carlisle Sure-Seal EPDM ElastoForm Flashing 12 in. x 100 ft. for conformable, self-curing penetration flashing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
