Skip to content
Carlisle Sure-Seal EPDM Pressure-Sensitive Cured Cover Strip, 60 mil Black or Gray Rubber Seam Roll
Regular price $600.00Orders start at $399 — combine any items to reach the minimum. Learn more
Carlisle Sure-Seal EPDM Pressure-Sensitive Cured Cover Strip, 60 mil Black or Gray Rubber Seam Roll
Carlisle's Sure-Seal PS Cured Cover Strip is a nominal 60-mil cured EPDM membrane with a 28-mil fully cured pressure-sensitive adhesive, sold on rolls. Available here in black or gray in 6 in. x 100 ft, 9 in. x 100 ft and 12 in. x 50 ft sizes. Use it to strip seams and metal edgings, seal FleeceBACK end laps, or repair cut membrane with HP-250 or Low-VOC Primer.
Key Features:
- Built-in adhesive: A nominal 28-mil-thick, fully cured synthetic rubber pressure-sensitive adhesive backs the strip.
- Field-membrane toughness: The strip is as tough as the field membrane.
- Movement tolerant: Fully cured construction handles expansion and contraction loads without weakening.
- Color matching: Available in black or gray to match the EPDM field membrane.
- Multiple widths: Offered in 6" x 100', 9" x 100' and 12" x 50' rolls.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Carlisle |
| Sell unit | 1 roll (per selected size) |
| Product line | Sure-Seal EPDM Pressure-Sensitive |
| Available colors | Black, Gray |
| Available sizes | .060" x 6" x 100', .060" x 9" x 100', .060" x 12" x 50' |
| Material | Cured EPDM with synthetic rubber pressure-sensitive adhesive |
| Color / finish | Black or Gray |
| Thickness | Nominal 60 mil membrane with nominal 28 mil adhesive |
| Width | 6 in., 9 in. or 12 in. depending on variant |
| Length | 100 ft (6 and 9 in. rolls) or 50 ft (12 in. roll) |
| Intended use | Stripping in seams and metal edgings, sealing FleeceBACK end laps, repairing cut membrane |
| Assembly | Use with Carlisle HP-250 or Low-VOC Primer |
Coverage & How Much You Need:
A 6 in. x 100 ft roll covers 100 linear feet of seam; the 9 in. x 100 ft roll covers 100 linear feet at greater width, and the 12 in. x 50 ft roll covers 50 linear feet. Order strip length equal to the total seam or lap length.
Fit and Compatibility:
For Carlisle Sure-Seal EPDM systems and FleeceBACK end laps. Must be used with Carlisle HP-250 or Low-VOC Primer, sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One roll of PS Cured Cover Strip in the color and size selected; primer is not included.
Q: Which primer does it need?
A: Carlisle specifies HP-250 or Low-VOC Primer.
Q: What colors and sizes are offered?
A: Black or gray in .060" x 6" x 100', .060" x 9" x 100' and .060" x 12" x 50' rolls.
Q: What is it used for?
A: Stripping in seams and metal edgings, sealing FleeceBACK system end laps, and repairing cut membrane.
Q: How tough is it?
A: The manufacturer states it is as tough as the field membrane and handles expansion and contraction loads without weakening.
Q: How much do I need?
A: One linear foot of strip per linear foot of seam, lap or repair.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Match the strip color to your black or gray field membrane for a consistent finish and use the widest strip over repairs where edge bearing matters. Prime the full strip width, apply before the primer flashes off, and roll firmly to bond. Keep rolls warm on cold days since pressure-sensitive adhesives need warmth to wet out fully.
Observe primer flammability and ventilation precautions and use roof-edge fall protection during installation.
Order Carlisle Sure-Seal EPDM PS Cured Cover Strip in black or gray to finish your seams the right way.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
