Skip to content
Blue Ridge FiberBoard 1-1/2 in. x 4 in. Cant Strips, 120 ft Bundle
Regular price $71.23Orders start at $399 — combine any items to reach the minimum. Learn more
Blue Ridge FiberBoard 1-1/2 in. x 4 in. Cant Strips, 120 ft Bundle
Blue Ridge FiberBoard cant strips in a 1-1/2 in. x 4 in. profile come as a 24-piece bundle delivering 120 linear feet for roofing edge transitions. Each bundle weighs 25 lb and meets ASTM C208, Type II with LEED applicability.
Key Features:
- ASTM C208 Type II: Manufactured to ASTM C208, Type II standards for wood fiberboard.
- 120 ft Per Bundle: Each 24-piece bundle provides 120 linear feet of cant strip.
- 1-1/2 x 4 Profile: The 1-1/2 in. x 4 in. nominal size creates a 45-degree transition edge for roofing membrane and flashing detail.
- LEED Contributing: LEED applicability is listed for the product.
- Roofing Insulation Category: Listed under roofing insulation products for low-slope roof systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Blue Ridge FiberBoard |
| Sell unit | Bundle of 24 strips, 120 linear ft |
| Nominal size | 1-1/2 in. x 4 in. |
| Pieces per bundle | 24 |
| Lineal feet per bundle | 120 lf |
| Lineal coverage per box | 120 ft |
| Applicable standards | ASTM C208, Type II; LEED |
| QXO category | Roofing Insulation |
| Weight | 25 lb per bundle |
Coverage & How Much You Need:
One bundle contains 24 cant strips covering 120 linear feet. Measure the total perimeter edge or transition length of your low-slope roof and divide by 120 to determine bundles needed, allowing for field cuts.
Fit and Compatibility:
Used in built-up and modified bitumen or membrane roof systems at perimeter edges, walls, and parapet transitions; pair with compatible base flashing and roofing insulation products from the same roof assembly specification.
Frequently Asked Questions (FAQ):
Q: How many strips come in a bundle?
A: Each bundle contains 24 cant strips.
Q: What is the total linear footage?
A: Each bundle provides 120 linear feet of cant strip.
Q: What size are the strips?
A: The strips have a nominal 1-1/2 in. x 4 in. profile.
Q: What standard does it meet?
A: It meets ASTM C208, Type II and carries LEED applicability.
Q: What is it used for?
A: It is used in roofing assemblies to create a 45-degree transition at edges, walls, and parapet bases for membrane and flashing.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Cant strips prevent membrane and flashing from bending over a sharp 90-degree corner, reducing stress cracking at parapets and curbs. Measure all wall-perimeter and curb transitions and order bundles by the 120 ft length to cover the run with minimal joints. Install per the roofing system manufacturer's detail drawings and fasten as specified.
Fiberboard dust and cutting require eye protection and a dust mask; work on low-slope roofs with proper fall protection per OSHA.
Order the Blue Ridge FiberBoard 1-1/2 in. x 4 in. cant strips, 120 ft bundle, for your roof transitions.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
