Skip to content
Berger Steel C55 Drip Edge 2-3/4 in. x 2-3/4 in. 26-Gauge White
Regular price $20.80Orders start at $399 — combine any items to reach the minimum. Learn more
Berger Steel C55 Drip Edge 2-3/4 in. x 2-3/4 in. 26-Gauge White
Berger's Steel C55 drip edge is a 30-degree metal edging formed from 26-gauge steel in a white finish, with a 2-3/4 in. x 2-3/4 in. profile. Each sell unit is one piece. It installs along roof eaves and rakes to direct runoff into the gutter and protect the edge.
Key Features:
- 26-gauge steel: Formed from 26-gauge steel for a rigid edge profile.
- 30-degree bend: Made with a 30-degree angle suited to standard eave installations.
- White finish: White finish blends with common trim and fascia colors.
- Eave protection: Directs water off the roof edge and into the gutter.
- 2-3/4 in. profile: Each leg measures 2-3/4 in. x 2-3/4 in.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Berger |
| Sell unit | 1 piece |
| Product line | Steel C55 Drip Edge |
| Available colors | White |
| Available sizes | 2-3/4 in. x 2-3/4 in. 26 GA |
| Material | Steel |
| Color / finish | White |
| Dimensions | 2-3/4 in. x 2-3/4 in., 30 degrees |
| Thickness | 26 ga |
| Intended use | Roof edge / drip edge flashing |
Coverage & How Much You Need:
One piece covers a single length of roof edge as sold; plan linear footage by measuring the eave and rake runs and ordering enough pieces to overlap joints.
Fit and Compatibility:
Installs under the first course of shingles along eaves and rakes and pairs with standard gutters. Compatible with typical residential and commercial roofing edge details.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One piece of Berger Steel C55 drip edge, white, 2-3/4 in. x 2-3/4 in., 26-gauge steel.
Q: What gauge is this drip edge?
A: 26-gauge steel.
Q: What angle is the bend?
A: It is formed at a 30-degree angle.
Q: How do I size my order?
A: Measure total eave and rake linear footage and order enough pieces to cover the runs with overlapped joints.
Q: Does it need fasteners?
A: Edge metal is normally nailed or screwed to the deck; fasteners are sold separately.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
For steel roofs or high-wind edge zones, 26-gauge C55 steel holds its profile better than thin aluminum edges. Lap joints at least a couple of inches in the direction of water flow and fasten on 8-12 in. centers. Choose aluminum drip cap instead where corrosion from coastal salt spray is a concern.
Cut metal edges are sharp; wear gloves and eye protection during handling and installation.
Order Berger Steel C55 white drip edge today for a clean, durable roof edge.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
