Skip to content
Berger Galvanized Ridge Roll, 2-5/8 in. x 10 ft., 28 Gauge, Mill
Regular price $52.50Orders start at $399 — combine any items to reach the minimum. Learn more
Berger Galvanized Ridge Roll, 2-5/8 in. x 10 ft., 28 Gauge, Mill
Berger Galvanized Ridge Roll is a 28-gauge galvanized steel ridge cap material, 2-5/8 in. wide in 10 ft. pieces, in a mill finish. Sold per piece, it forms the rolled cap over roof ridges on commercial and residential metal-edged roofing details. Pair with matching galvanized flashing and edging for a consistent finish.
Key Features:
- Galvanized steel: Rolled from galvanized steel for corrosion resistance at the ridge.
- 28 gauge: 28 GA material thickness suited to ridge cap work.
- 2-5/8 inch profile: 2-5/8 in. profile width for standard ridge coverage.
- 10-foot lengths: Supplied in 10 ft. pieces to span long ridge runs with fewer joints.
- Mill finish: Mill (unpainted) galvanized finish.
- Specialty flashing: Used as specialty flashing in metal edging roof details.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Berger |
| Sell unit | 1 piece, 2-5/8 in. x 10 ft. |
| Product line | Galvanized Ridge Roll |
| Available colors | Mill |
| Available sizes | 2-5/8 in. x 10 ft., 28 GA |
| Material | Galvanized steel |
| Finish / texture | Mill (unpainted galvanized) |
| Dimensions | 2-5/8 in. x 10 ft. |
| Thickness | 28 GA |
| Intended use | Ridge cap / specialty flashing on metal-edged roofing |
Coverage & How Much You Need:
Each 10 ft. piece covers 10 linear feet of ridge; measure total ridge length, add allowance for laps and waste, and divide by 10 to determine pieces needed.
Fit and Compatibility:
Pairs with other galvanized flashing, edging and ridge accessories in mill finish. Confirm ridge width against the 2-5/8 in. profile before ordering; wider ridges need a different profile.
Frequently Asked Questions (FAQ):
Q: What are the dimensions?
A: 2-5/8 in. wide profile in 10 ft. lengths, 28 gauge.
Q: What material is it?
A: Galvanized steel with a mill (unpainted) finish.
Q: How is it sold?
A: Per piece; one 10 ft. length per order.
Q: What is it used for?
A: Forming ridge cap over roof ridges as a specialty flashing on metal-edged roofing.
Q: Can it be painted?
A: The mill galvanized finish is unpainted; paint systems compatible with galvanized steel should be used if a color finish is desired.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Galvanized ridge roll is the economical choice where a bare-galvanized cap is acceptable; for painted metal roofs, match to a pre-finished ridge cap instead. Lap pieces at least a few inches in the direction of prevailing weather and secure with fasteners that match the gauge. Bend or crimp the ends on site for a clean termination at hips and gables.
Galvanized steel edges and cut ends are sharp; wear cut-resistant gloves and eye protection when handling, cutting and fastening ridge roll.
Order Berger 2-5/8 in. x 10 ft. 28-gauge Galvanized Ridge Roll for durable mill-finish ridge caps.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
