Skip to content
Berger Copper F5 Drip Edge Flashing, 10 ft. x 16 oz. Copper
Regular price $39.23Orders start at $399 — combine any items to reach the minimum. Learn more
Berger Copper F5 Drip Edge Flashing, 10 ft. x 16 oz. Copper
Berger Copper F5 drip edge flashing directs rainwater off the roof edge and into the gutter system, protecting the eave against water infiltration on new construction and reroofing projects. This 10 ft. length is formed from 16 oz. copper with no hem. Pair it with gutter systems and compatible roof underlayment for complete edge protection.
Key Features:
- Directs runoff: Drip edge design channels rainwater off the roof and into the gutter system.
- Long-lasting copper: 16 oz. copper resists fire, hail, mildew and high winds and withstands freeze-thaw cycles.
- Weathering patina: Copper oxidizes attractively over time rather than rusting and is easy to maintain.
- Water protection: Shields the roof edge against water infiltration.
- No hem profile: F5 profile is supplied with no hem for straightforward edge installation.
- New or re-roof: Suitable for both new construction and reroofing projects.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Berger |
| Sell unit | 1 piece, 10 ft. |
| Product line | Copper F5 Drip Edge |
| Material | Copper |
| Copper weight | 16 oz. |
| Available sizes | 10 ft. length, 16 oz. copper |
| Length | 10 ft. |
| Profile | F5, no hem |
| Finish | Mill copper (oxidizes naturally) |
| Intended use | Roof edge runoff control for new construction and reroofing |
| Category | Drip edge flashing |
Coverage & How Much You Need:
One piece provides 10 linear feet of roof-edge flashing; measure the total eave and rake length and order enough pieces to cover it with typical overlaps at joints.
Fit and Compatibility:
Designed to pair with standard gutter systems along the eave and with Berger flashing accessories; check that the F5 profile suits your roof edge detail before ordering.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 10 ft. length of Berger F5 drip edge in 16 oz. copper.
Q: How much do I need?
A: Measure total eave and rake footage, divide by 10 ft. per piece and add allowance for laps at joints.
Q: Will the copper rust?
A: No, copper does not rust; it oxidizes to a natural patina over time and is easy to maintain.
Q: Can I use it on a reroof?
A: Yes, drip edge flashing is intended for both new construction and reroofing projects.
Q: Is it hemmed?
A: No, this F5 drip edge is supplied with no hem.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Copper drip edge is the premium choice where a long service life and a handsome weathered edge matter; the 16 oz. weight offers good stiffness for straight runs. Install after the underlayment at the eaves and before gutter hanging so water discharges cleanly into the trough. Overlap joints a few inches in the direction of water flow and use copper or stainless fasteners to avoid galvanic staining.
Copper edges and corners are sharp; wear cut-resistant gloves and eye protection when handling and cutting flashing.
Order Berger Copper F5 Drip Edge 16 oz. for durable, attractive roof-edge water control.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
