Skip to content
Berenson Rivet Rebel Cabinet Pull, 128 mm CC, 7-13/32 in L, Matte Black and Brushed Nickel
Regular price $11.44Orders start at $399 — combine any items to reach the minimum. Learn more
Berenson Rivet Rebel Cabinet Pull, 128 mm CC, 7-13/32 in L, Matte Black and Brushed Nickel
This is the Berenson Rivet Rebel 5116 T-bar cabinet pull, a transitional square-design pull in a mixed Matte Black and Brushed Nickel finish. It is drilled at 128 mm CC hole spacing and measures 7-13/32 in L x 23/32 in W. CC (center-to-center) is the hole spacing that must match your drawer or door drilling.
Key Features:
- Mixed finish design: Combines Matte Black with Brushed Nickel accents for a two-tone transitional look.
- T-bar style: A T-bar pull handle design in a square overall motif.
- 128 mm CC spacing: Drilled at 128 mm (about 5 in) center-to-center, a common metric hardware spacing.
- Long reach: Measures 7-13/32 in L x 23/32 in W for a generous grip across wide drawers.
- Transitional styling: Square design elements bring a classic touch to contemporary cabinets.
- Coordinates with collection: Part of the Rivet Rebel collection, which includes matching knobs and pulls.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Berenson |
| Sell unit | 1 piece |
| Collection | Rivet Rebel |
| Product type | Cabinet pull |
| Style | Transitional, T-bar, square design |
| Available finishes | Black/Brushed Nickel |
| Available sizes | 128 mm CC |
| Material | Zinc (per typical construction; finish mix as printed) |
| Overall length / width / projection | 7-13/32 in L x 23/32 in W |
| Nominal size | 128 mm CC |
| Pack quantity | 1 per unit |
Fit and Compatibility:
Requires drawer or door fronts drilled at 128 mm center-to-center spacing, a standard metric cabinet hole pattern. Pair with other Rivet Rebel collection knobs and pulls for a matched set; the source does not state that mounting screws are included.
Frequently Asked Questions (FAQ):
Q: What is 128 mm CC in inches?
A: 128 mm is about 5-1/32 in center-to-center; it is a standard metric cabinet hardware spacing.
Q: What does the finish look like?
A: It is a two-tone Matte Black and Brushed Nickel mixed finish.
Q: What are the pull's dimensions?
A: 7-13/32 in L x 23/32 in W, drilled at 128 mm CC.
Q: Are screws included?
A: The source does not state that screws are included, so confirm fasteners before installation.
Q: Will it fit my existing holes?
A: Only if your drawer or door is drilled at 128 mm center-to-center; measure before ordering.
Q: Is there a matching knob?
A: The Rivet Rebel collection includes knobs and pulls in the same square design.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The two-tone Matte Black and Brushed Nickel finish is a good bridge when a kitchen mixes black light fixtures or window frames with stainless appliances. Confirm the 128 mm CC spacing before switching from existing hardware, since converting from inch-based spacings requires redrilling. The 7-13/32 in overall length gives a full-handed grip suited to wide drawers and appliance-look panels.
Drill pilot holes to the correct depth before mounting so screws do not blow through the cabinet face.
Upgrade your cabinets with the Berenson Rivet Rebel 128 mm CC pull in Matte Black and Brushed Nickel.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
