Skip to content
Berenson BBP Collection Transitional Cabinet Pull, Zinc, 3 in or 96 mm CC, Brushed or Polished Brass
Regular price $1.44Orders start at $399 — combine any items to reach the minimum. Learn more
Berenson BBP Collection Transitional Cabinet Pull, Zinc, 3 in or 96 mm CC, Brushed or Polished Brass
This Berenson BBP Collection pull is a transitional zinc handle offered in two center-to-center (CC) spacings: 3 in and 96 mm. Finishes are Brushed Brass and Polished Brass. Overall lengths vary by variant from 3-3/8 in to 5-1/4 in, and one pull is sold per unit with manufacturer packaging of 25 per box.
Key Features:
- Two CC sizes: Choose 3 in CC or 96 mm CC to match your drilled hole spacing.
- Transitional design: Clean transitional styling works across kitchen and bath cabinetry.
- Brass-tone finishes: Available in Brushed Brass and Polished Brass.
- Zinc build: Die-cast zinc construction with projections from 3/4 in depending on variant.
- Varied profiles: Variant lengths range from 3-3/8 in to 5-1/4 in with widths from 1/8 in to 7/8 in.
- Bulk packaging: Manufacturer packaging quantity is 25 pulls per box.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Berenson |
| Sell unit | 1 piece |
| Collection | BBP |
| Product type | Cabinet pull |
| Available finishes | Brushed Brass, Polished Brass |
| Available sizes | 3 in CC, 96 mm CC |
| Overall length / width / projection | 96 mm CC: 5 in L x 7/8 in W, 3/4 in projection; 3 in CC variants: 3-3/8 in L x 1/8 in W and 5-1/4 in L x 1/2 in W |
| Material | Zinc |
| Style | Transitional |
| Pack quantity | 25 per box |
Fit and Compatibility:
The CC measurement is the hole spacing that must match your drawer or door drilling; choose 3 in CC or 96 mm CC accordingly. Pairs with other Berenson BBP Collection knobs and pulls. Screws are not listed in the sources for this line.
Frequently Asked Questions (FAQ):
Q: What CC sizes are offered?
A: The line comes in 3 in CC and 96 mm CC; CC is the distance between mounting screw holes.
Q: Will a 96 mm CC pull fit holes drilled 3-3/4 in apart?
A: Yes, 96 mm equals approximately 3-3/4 in, so it matches that hole spacing.
Q: Which finishes are available?
A: Brushed Brass and Polished Brass.
Q: Do screws come with the pull?
A: Screws are not listed in the product information for this line; check your hardware before installing.
Q: Are all sizes the same length?
A: No, overall lengths vary by variant from 3-3/8 in to 5-1/4 in while the CC spacing is what must match your holes.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Always size pulls by CC, not overall length: the 96 mm CC variant suits European-style drilling while 3 in CC matches standard US spacing. The longer 5-1/4 in overall length on the 3 in CC variant gives a fuller look on wide drawers. Match the finish to the BBP knobs for a coordinated set across doors and drawers.
Verify hole spacing before drilling new holes; misdrilled cabinet fronts are difficult to repair.
Choose the Berenson BBP Collection pull in the CC size and brass finish that matches your cabinetry today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
