Skip to content
Berenson Art Tech Fuji Collection Contemporary Zinc Cabinet Pull, 160 mm or 224 mm CC, Brushed Nickel or Polished Chrome
Regular price $20.50Orders start at $399 — combine any items to reach the minimum. Learn more
Berenson Art Tech Fuji Collection Contemporary Zinc Cabinet Pull, 160 mm or 224 mm CC, Brushed Nickel or Polished Chrome
The Berenson R. Christensen Fuji Collection pull is a contemporary zinc bar pull in two long sizes: 160 mm CC (9 in L) and 224 mm CC (12-1/2 in L), each 1-1/4 in W, in Brushed Nickel or Polished Chrome. Two M4 screws with break points at 17 through 38 mm are included. CC is the center-to-center hole spacing your cabinet must match.
Key Features:
- Long bar sizes: 160 mm CC with 9 in overall length or 224 mm CC with 12-1/2 in length, both 1-1/4 in W.
- Two finishes: Brushed Nickel and Polished Chrome finishes on a zinc body.
- Breakaway screws: Includes two M4 screws with breaking points at 17, 22, 27, 32 and 38 mm.
- Generous hand clearance: 19/32 in hand clearance with a 13/16 in projection and 1-5/8 in base size on the 160 mm CC item.
- Contemporary design: Fuji Collection from the R. Christensen Art Tech series.
- Ready to install: Mounting screws are included with every pull.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Berenson |
| Sell unit | 1 piece |
| Collection | Fuji (R. Christensen, Art Tech series) |
| Product type | Cabinet pull |
| Style | Contemporary |
| Available finishes | Brushed Nickel, Polished Chrome |
| Available sizes | 160 mm CC, 224 mm CC |
| Overall length / width / projection | 160 mm CC: 9 in L x 1-1/4 in W, 13/16 in projection; 224 mm CC: 12-1/2 in L x 1-1/4 in W |
| Base size | 1-5/8 in (160 mm CC item) |
| Hand clearance | 19/32 in (160 mm CC item) |
| Material | Zinc |
| Mounting | M4 screws included, with breaking points at 17, 22, 27, 32 and 38 mm |
Fit and Compatibility:
Designed for cabinets with matching 160 mm or 224 mm center-to-center hole spacing. Screws break at 17, 22, 27, 32 or 38 mm to suit different door and drawer thicknesses; nothing else is required for installation.
Frequently Asked Questions (FAQ):
Q: What sizes are available?
A: The Fuji Collection pull comes in 160 mm CC (9 in long) and 224 mm CC (12-1/2 in long), both 1-1/4 in wide.
Q: Which finish should I choose?
A: Brushed Nickel suits warm woods and satin fixtures, while Polished Chrome pairs with shiny faucets and appliances; both are zinc with the listed finish.
Q: Do I need to buy screws?
A: No, two M4 screws with breaking points at 17, 22, 27, 32 and 38 mm are included with each pull.
Q: Will this fit my existing holes?
A: Only if your drilled holes are 160 mm or 224 mm apart center to center; measure before ordering.
Q: Is this size good for large drawers?
A: Yes, these long pulls are proportioned for wide drawers; the 224 mm CC size spans larger fronts than the 160 mm CC.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The Fuji pull's long span makes it a good appliance-look choice for wide base drawers; use 160 mm CC on drawers roughly 24 to 36 in wide and 224 mm CC on wider fronts. Snap the M4 screws at the point closest to your panel thickness so the threads seat fully. Keep all pulls in one finish across a kitchen for a clean contemporary line.
Wear eye protection when drilling new mounting holes and snap screws away from your face to avoid flying fragments.
Add the Berenson Art Tech Fuji Collection pull to your cart in the size and finish you need.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
