Skip to content
Arborite W485 Contemporary Maple Vertical Grade Laminate Sheet, 48 in. x 96 in., Cashmere Finish
Regular price $102.24Orders start at $399 — combine any items to reach the minimum. Learn more
Arborite W485 Contemporary Maple Vertical Grade Laminate Sheet, 48 in. x 96 in., Cashmere Finish
Arborite W485 Contemporary Maple is a maple woodgrain high-pressure laminate sheet in 48 in. x 96 in. with a Cashmere finish. It is offered in A3 vertical grade for cabinet ends, wall panels and other vertical surfaces. One sheet per order; an 8-sheet minimum applies.
Key Features:
- Maple woodgrain: Contemporary Maple is a woodgrain design in the W485 series.
- Vertical grade: Offered in A3 Vertical HPL, intended for cabinet sides, wall panels and other vertical surfaces.
- Cashmere finish: The Cashmere finish gives the surface its specified texture and sheen.
- Large sheet format: The 48 in. x 96 in. sheet covers tall cabinet runs and wall applications with minimal seams.
- Order minimum: This design carries an 8-sheet minimum per order as stated by the manufacturer.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Arborite |
| Manufacturer model | W485 |
| Sell unit | 1 sheet |
| Design number | W485 |
| Design name | Contemporary Maple |
| Available finishes | (CA) Cashmere Finish |
| Available grades | A3 Vertical HPL |
| Available sheet sizes | 48 in. x 96 in. |
| Material | High-pressure laminate (HPL) |
| Surface / pattern | Woodgrain maple pattern |
| Recommended use | Vertical (A3 vertical grade) |
| Order minimum | 8 sheets |
Coverage & How Much You Need:
One 48 in. x 96 in. sheet covers 32 sq. ft. before cutouts and trimming. For full-height cabinet ends and wall panels, lay out your cuts to share seams across the sheet.
Fit and Compatibility:
Bond to flat particleboard or MDF panels for casework, wainscot and wall linings using contact adhesive. Balancing backer laminate and substrate materials are sold separately. Only the A3 vertical grade is listed, so this variant is not intended for postformed countertop edges.
Frequently Asked Questions (FAQ):
Q: What comes with my order?
A: One 48 in. x 96 in. Arborite W485 Contemporary Maple sheet in A3 vertical grade with a Cashmere finish; note the manufacturer lists an 8-sheet minimum for this design.
Q: What is vertical grade used for?
A: A3 vertical HPL is made for vertical surfaces such as cabinet sides, doors, wainscot and wall panels, where impact demands are lower than countertops.
Q: How do I apply the sheet?
A: Apply contact adhesive to both the substrate and the laminate, align carefully since the bond is instant, then roll or press firmly and trim with a router.
Q: How much area does one sheet cover?
A: A 48 in. x 96 in. sheet provides 32 sq. ft. of coverage before trimming and cutout waste.
Q: Can this be used on countertops?
A: No postforming or general-purpose horizontal grade is listed for this design, so it is intended for vertical surfaces.
Q: What is the sheet thickness?
A: A printed thickness is not given in the available sources.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Treat W485 as a vertical-grade product: bond it to flat, sanded particleboard or MDF and always add a balancing backer to prevent the panel from bowing. The Cashmere finish tends to show fingerprints on light maple tones less than high-gloss surfaces. Plan your cut list before ordering because the 8-sheet minimum makes efficient sheet utilization worthwhile.
Wear eye protection, a dust mask and gloves when cutting or routing laminate; edges and trim chips are sharp.
Order Arborite W485 Contemporary Maple vertical grade laminate for your next casework project.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
