Arborite W450 Rift Golden Oak High-Pressure Laminate Sheet 48 x 96, 48 x 120 or 60 x 144 in., Evergrain Finish, Vertical Grade
Regular price $122.37Orders start at $399 — combine any items to reach the minimum. Learn more
Arborite W450 Rift Golden Oak High-Pressure Laminate Sheet 48 x 96, 48 x 120 or 60 x 144 in., Evergrain Finish, Vertical Grade
This Arborite W450 Rift Golden Oak design is a vertical-grade high-pressure laminate with a straight rift-cut golden oak grain and an Evergrain textured finish. Each order is one sheet in your choice of 48 in. x 96 in., 48 in. x 120 in. or 60 in. x 144 in. It suits cabinet sides, doors, wall paneling and other vertical surfaces.
Key Features:
- Golden rift oak grain: Rift Golden Oak shows a warm, straight rift-sawn oak figure.
- Evergrain texture: The Evergrain (EV) finish gives the surface a realistic wood texture.
- Vertical grade: A3 vertical HPL is intended for cabinet sides, doors, wainscot and wall panels.
- Three sheet sizes: Pick from 48 in. x 96 in., 48 in. x 120 in. or 60 in. x 144 in. to fit the run.
- Large panels, fewer seams: The 60 in. x 144 in. option covers tall or wide panels in one piece.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Arborite |
| Manufacturer model | W450 |
| Sell unit | 1 sheet |
| Design number | W450 |
| Design name | Rift Golden Oak |
| Material | High-pressure laminate (HPL) |
| Surface / pattern | Rift-cut golden oak woodgrain, Evergrain (EV) textured finish |
| Available finishes | Evergrain (EV) |
| Available grades | A3 Vertical HPL |
| Available sheet sizes | 48 in. x 96 in., 48 in. x 120 in., 60 in. x 144 in. |
| Recommended use | Vertical surfaces such as cabinet sides, doors and wall paneling |
| Nominal size | 48 in. x 96 in., 48 in. x 120 in. or 60 in. x 144 in. |
| Assembly | Bond to substrate with contact adhesive; flush trim after lamination |
Coverage & How Much You Need:
Coverage per sheet is 32 sq. ft. (48 x 96), 40 sq. ft. (48 x 120) or 60 sq. ft. (60 x 144) before waste. Choose the largest sheet that fits your handling setup to minimize seams on tall runs.
Fit and Compatibility:
Bonds with contact adhesive to particleboard, MDF or plywood; pair with an HPL backer sheet on the opposite face to keep panels flat. Adhesive, backers and substrate are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One Arborite W450 Rift Golden Oak sheet in Evergrain finish, A3 vertical grade, in the size you select: 48 in. x 96 in., 48 in. x 120 in. or 60 in. x 144 in.
Q: Which sheet size is best for wall paneling?
A: For tall or wide panel walls the 60 in. x 144 in. sheet minimizes seams; the 96 in. and 120 in. lengths suit standard cabinet work.
Q: Is this suitable for countertops?
A: No, vertical grade is specified for vertical surfaces; use a postforming or standard grade for horizontal countertop tops.
Q: How is it installed?
A: Apply contact adhesive to both sheet and substrate, align carefully since contact adhesive bonds immediately, then roll firmly and flush-trim the edges.
Q: How should I handle a 60 x 144 sheet?
A: Carry it on edge with two people and support it flat on a clean, full-size table during cutting and gluing.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Golden rift grain looks best run vertically on tall panels and consistently across all doors in a room. A backer sheet on the reverse side is essential for doors and tall gables to prevent bow. Allow 1/4 in. oversize on cuts and finish with a flush-trim bit once the adhesive has fully set.
Large laminate sheets are heavy with sharp edges, so wear cut-resistant gloves and eye protection and use two-person handling during cutting and glue-up.
Order the Arborite W450 Rift Golden Oak vertical-grade laminate sheet in the size your project needs.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.

