Skip to content
Arborite Pure V7003 Black Satin Anti-Fingerprint HPL Laminate Sheet 48 in. x 96/120 in.
Regular price $273.24Orders start at $399 — combine any items to reach the minimum. Learn more
Arborite Pure V7003 Black Satin Anti-Fingerprint HPL Laminate Sheet 48 in. x 96/120 in.
Arborite Pure V7003 Black Satin is an anti-fingerprint high-pressure laminate in a deep black satin finish. Each order is one sheet, offered in 48 in. x 96 in. or 48 in. x 120 in. with the P4 anti-fingerprint surface, ready to bond to particleboard or MDF for countertops, casework and wall panels.
Key Features:
- Anti-fingerprint surface: The P4 finish is an anti-fingerprint high-pressure laminate surface that resists visible smudging and marks.
- Two sheet sizes: Available in 48 in. x 96 in. and 48 in. x 120 in. sheets to fit different project layouts.
- Rich black tone: Black Satin V7003 delivers a deep, even black that suits modern cabinetry and worktops.
- Large-format coverage: A 48 in. x 120 in. sheet covers 40 sq. ft., reducing seams on wide runs.
- Fabricator friendly: Standard HPL bonds with contact adhesive to particleboard or MDF and can be cut with common shop tooling.
- Specialty collection: Part of the Arborite Pure fingerprint-resistant decorative laminate line.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Arborite |
| Sell unit | 1 sheet |
| Design name | Pure V7003 Black Satin |
| Available finishes | P4 Anti-Fingerprint HPL |
| Available sheet sizes | ['48 in. x 96 in.', '48 in. x 120 in.'] |
| Surface / pattern | Solid black satin tone, anti-fingerprint texture |
| Recommended use | General decorative surfacing; suitable for horizontal or vertical surfaces as fabricated |
| Line | Arborite Pure fingerprint-resistant laminates |
Coverage & How Much You Need:
One 48 in. x 96 in. sheet covers 32 sq. ft. and one 48 in. x 120 in. sheet covers 40 sq. ft. Plan layouts to use full sheet widths where possible and allow cut allowance for trimming and seams.
Fit and Compatibility:
Bonds to standard substrates such as particleboard or MDF with contact adhesive; use a matching backer sheet on the underside of countertops to balance the panel. Postformed edges require a postforming grade, which is not listed for this design.
Frequently Asked Questions (FAQ):
Q: What is included with my order?
A: One laminate sheet in the size you select, either 48 in. x 96 in. or 48 in. x 120 in., in the P4 anti-fingerprint finish.
Q: How much area does one sheet cover?
A: A 48 in. x 96 in. sheet covers 32 sq. ft. and a 48 in. x 120 in. sheet covers 40 sq. ft. before trimming.
Q: How is this laminate installed?
A: Cut the sheet to size, then bond it to a smooth substrate such as particleboard or MDF with contact adhesive, rolling the surface well to remove air pockets.
Q: What makes the P4 finish different?
A: P4 is an anti-fingerprint high-pressure laminate finish designed to resist visible smudges and marks on the surface.
Q: Do I need a backer sheet?
A: Yes, a balanced backer on the underside of a countertop helps prevent the panel from warping.
Q: Is a fire-rated or chemical-resistant grade available for this design?
A: The listed items are P4 anti-fingerprint HPL only; no fire-rated or chemical-resistant grade is listed for this page.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Deep black anti-fingerprint laminate hides smudges on high-touch surfaces while keeping a clean, uniform look. Bond to flat, sanded 45 lb. particleboard or MDF and keep a balanced backer on the reverse to control warp. Black surfaces show sanding scratches and adhesive ridges more readily, so sand the substrate evenly and roll the sheet thoroughly. For rolled-edge work, confirm a postforming grade is offered for this design before ordering.
Laminate sheets have sharp cut edges and trimming generates fine dust, so wear cut-resistant gloves, eye protection and a dust mask while cutting and handling.
Order the Arborite Pure V7003 Black Satin anti-fingerprint laminate sheet in the 48 in. x 96 in. or 48 in. x 120 in. size that fits your project.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
