Arborite Pearwood High-Pressure Laminate Sheet W453 Velvatex Finish Postforming Grade

Arborite design W453 Pearwood is a woodgrain high-pressure laminate sheet sold with a Velvatex finish in postforming (A4) grade, which is made for countertops with rolled or bullnose edges. One order unit is 1 sheet, and you choose from eight sizes ranging from 30 in. x 96 in. up to 60 in. x 144 in. Pair it with a particleboard or MDF substrate and contact adhesive for a complete countertop or casework build.

Key Features:

• Woodgrain design: Pearwood is a wood-pattern HPL design in the Arborite surfacing line.
• Velvatex finish: Every variant on this page is produced in the Velvatex (VL) finish.
• Postforming grade: A4 Postform HPL is intended for horizontal surfaces with formed, rounded edges.
• Eight sheet sizes: Available in 30 in. x 96 in. through 60 in. x 144 in. sheet sizes.
• Countertop ready: Postforming grade bonds to particleboard or MDF for rolled-edge countertop work.

Specifications Table:

Coverage & How Much You Need:

Sheet coverage depends on the size chosen: 30 in. x 96 in. is about 20 sq. ft., while a 60 in. x 144 in. sheet covers about 60 sq. ft. Add extra for postformed edge build-ups and seam trim.

Fit and Compatibility:

Use with a stable substrate such as particleboard or MDF and contact adhesive; pair with a matching backer sheet on the underside to balance the panel. Backer sheet, adhesive and rollers are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included with one order?
A: One Arborite W453 Pearwood laminate sheet in the size, finish and grade you select at checkout. Adhesive, substrate and backer sheets are not included.

Q: Which sheet size should I choose for a countertop?
A: Choose a depth that covers your deck plus the postformed front edge build-up; 30 in. wide sheets suit standard 25 in. deep countertops, while 48 in. and 60 in. sheets suit islands and larger casework.

Q: What is postforming grade for?
A: A4 Postform HPL is formulated to be heated and bent over a radius so the countertop surface wraps onto the front edge without a seam.

Q: Does this design come in other finishes?
A: On this page all eight variants are offered only in the Velvatex finish; no other finish is listed in the sources.

Q: How do I install it?
A: Cut to size with a panel-cutting saw, apply contact cement to both the substrate and the sheet, and roll the surface firmly to remove air pockets.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

For rolled-edge countertops, postforming grade is the right choice because it bends over the former radius without cracking. Always glue a balancing backer to the underside of particleboard or MDF cores to keep the panel flat, and let large sheets acclimate in the shop before cutting. Order the longest sheet your layout allows to keep seams out of the main work area.

HPL sheets are heavy and have sharp cut edges, so carry large sheets with a partner and wear gloves and eye protection when cutting and routing.

Order your Arborite W453 Pearwood postforming laminate sheet in the size that fits your countertop layout.