Arborite P271 Fresh Mist Postforming High-Pressure Laminate Sheet, Cashmere Finish, Multiple Sizes

Arborite P271 Fresh Mist is a postforming high-pressure laminate sheet in a Cashmere finish, supplied in seven sheet sizes from 30 in. x 96 in. up to 60 in. x 144 in. You receive one sheet per order in your chosen size. Pair it with a particleboard or MDF substrate and contact adhesive for rolled-edge countertops.

Key Features:

• Postforming grade: A4 Postform HPL is designed to bend around a radius on horizontal surfaces such as rolled-edge countertops.
• Cashmere finish: The (CA) Cashmere Finish gives a refined low-gloss surface texture.
• Seven sheet sizes: Sheets range from 30 in. x 96 in. to 60 in. x 144 in. so long runs need fewer seams.
• Soft mist decor: Fresh Mist is a light decorative design for countertops, vanities and casework.
• Full-size coverage: A 60 in. x 144 in. sheet provides up to 60 square feet of surface material.
• Bond-ready back: The back bonds with contact adhesive to particleboard, MDF or plywood cores.

Specifications Table:

Coverage & How Much You Need:

One sheet covers its full listed area, from 20 sq. ft. (30 in. x 96 in.) to 60 sq. ft. (60 in. x 144 in.). Leave trim allowance on all sides and plan seams over supporting substrate.

Fit and Compatibility:

Bonds to standard particleboard, MDF or plywood substrates with contact adhesive and forms on postforming equipment for rolled front edges. Backer laminate sheets for countertop undersides are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included with my order?
A: One laminate sheet in the selected size, finish and grade; adhesive, substrate and backer sheets are sold separately.

Q: Which size should I choose?
A: Choose a sheet larger than the finished piece in both directions so you can trim to size; larger sheets such as 60 in. x 144 in. reduce seams on long runs.

Q: Can it be formed around a rounded edge?
A: Yes, the A4 Postform grade is made to be bent around a radius on horizontal surfaces with postforming equipment.

Q: How is it installed?
A: Bond it to a flat wood substrate with contact adhesive on both surfaces, roll it down firmly, then trim and finish the edges.

Q: What is the surface finish?
A: This design is offered in the (CA) Cashmere Finish, a low-gloss texture.

Q: Are there other finishes or grades available?
A: On this page Fresh Mist is listed only in Cashmere Finish and A4 Postform HPL, with seven sheet sizes.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

A light decor like Fresh Mist is a practical choice for kitchen and vanity tops; use backer laminate on the underside to keep the panel balanced and flat. Always postform the front edge before bonding the top surface, and keep the substrate free of dust so the contact adhesive grabs fully. For island or peninsula work, the 60 in. wide sheets let you run the grain-length dimension without a cross seam.

Large laminate sheets are heavy and brittle at the edges; carry them vertically with two people and wear gloves and eye protection when cutting and routing.

Order the Arborite Fresh Mist postforming laminate sheet in the size that fits your countertop layout.