Skip to content
Amerock Riva Zinc Bar Cabinet Pull, 3 in CC, 3-3/4 in CC and 6-5/16 in CC, Graphite and Satin Nickel
Regular price $11.33Orders start at $399 — combine any items to reach the minimum. Learn more
Amerock Riva Zinc Bar Cabinet Pull, 3 in CC, 3-3/4 in CC and 6-5/16 in CC, Graphite and Satin Nickel
The Amerock Riva Collection pull is a slim contemporary zinc bar pull available in 3 in CC, 3-3/4 in CC and 6-5/16 in CC hole spacings in Graphite or Satin Nickel. The 6-5/16 in CC size measures 7 in long by 7/16 in wide with a 1-1/4 in projection, and each pull includes a #8-32 x 1 in truss head machine screw. CC is the center-to-center spacing between the two mounting holes.
Key Features:
- Three hole spacings: Offered in 3 in CC, 3-3/4 in CC and 6-5/16 in CC to match common cabinet drilling.
- Slim bar profile: A narrow 7/16 in wide bar with a 1-1/4 in projection for a light, contemporary look.
- Two finishes: Available in Graphite and Satin Nickel.
- Zinc construction: Die-cast zinc bar built for daily drawer and door use.
- Screws included: Each pull includes a #8-32 x 1 in truss head machine screw.
- Riva family match: Coordinates with Riva Collection appliance pulls in Graphite for full-kitchen consistency.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Amerock |
| Sell unit | 1 pull with mounting screw |
| Collection | Riva |
| Product type | Bar cabinet pull |
| Available finishes | Graphite, Satin Nickel |
| Available sizes | 3 in CC (3-5/8 in L x 7/16 in W), 3-3/4 in CC (4-7/16 in L x 7/16 in W), 6-5/16 in CC (7 in L x 7/16 in W) |
| Style | Contemporary |
| Overall length / width | 7 in L x 7/16 in W (6-5/16 in CC size) |
| Projection | 1-1/4 in |
| Base size | 13/16 in L x 7/16 in W (6-5/16 in CC size) |
| Screw size | #8-32 x 1 in truss head machine screw (included) |
| Material | Zinc |
| Mounting | Two-hole, screws included |
Fit and Compatibility:
Match the pull's CC spacing to your existing cabinet holes: 3 in and 3-3/4 in CC suit standard drawers, 6-5/16 in CC suits wider drawers and doors. Pairs with Riva Collection appliance pulls in Graphite; Satin Nickel suits standalone schemes.
Frequently Asked Questions (FAQ):
Q: What is included with each pull?
A: One pull and a #8-32 x 1 in truss head machine screw for mounting.
Q: What does CC mean on the size?
A: CC is center-to-center, the distance between the two mounting holes; it must match the holes in your drawer or door.
Q: Which sizes are available?
A: 3 in CC, 3-3/4 in CC and 6-5/16 in CC.
Q: Which finishes are available?
A: Graphite and Satin Nickel.
Q: How long is each pull overall?
A: The 3 in CC pull is 3-5/8 in long, the 3-3/4 in CC pull is 4-7/16 in long, and the 6-5/16 in CC pull is 7 in long.
Q: What is it made of?
A: It is made of zinc with a plated finish.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
This slim Riva bar suits modern flat-panel and shaker doors where a narrower profile is preferred. Measure existing center-to-center holes before ordering; the 3-3/4 in CC size is the most common US drawer spacing and the 3 in CC size fits many euro-style cabinets. Choose 6-5/16 in CC for drawers wider than about 30 in and keep Graphite or Satin Nickel consistent across all pulls and the matching Riva appliance pull.
Drill pilot holes when adding new mounting holes so the drawer front does not split, and tighten screws by hand on the final pass to protect the finish.
Pick your CC size and finish of the Amerock Riva bar pull and complete your cabinet hardware set today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
