Skip to content
Amerock Inspirations Zinc Cabinet Pull, 3-3/4 to 6-5/16 in CC, Satin Nickel, Caramel Bronze or Venetian Bronze
Regular price $7.33Orders start at $399 — combine any items to reach the minimum. Learn more
Amerock Inspirations Zinc Cabinet Pull, 3-3/4 to 6-5/16 in CC, Satin Nickel, Caramel Bronze or Venetian Bronze
This Amerock Inspirations Collection pull is a traditional zinc cabinet pull offered in 3-3/4 in, 5-1/16 in and 6-5/16 in center-to-center sizes with Satin Nickel, Caramel Bronze or Venetian Bronze finishes. Each pull includes a #8-32 x 1 in truss head machine screw. It pairs with other Inspirations Collection knobs and pulls for a coordinated look.
Key Features:
- Traditional styling: A traditional Inspirations Collection profile in cast zinc, suited to classic kitchen and bath cabinetry.
- Three hole spacings: Offered in 3-3/4 in, 5-1/16 in and 6-5/16 in center-to-center sizes to match existing drilled holes.
- Three finishes: Available in Satin Nickel, Caramel Bronze and Venetian Bronze.
- Slim bar profile: Bar widths run 3/4 in on the two larger sizes and 11/16 in on the 3-3/4 in CC size, with 1-3/16 in projection.
- Screws included: Each pull includes a #8-32 x 1 in truss head machine screw for mounting.
- Boxed quantity: Packaged 10 pieces per box.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Amerock |
| Sell unit | 1 piece |
| Collection | Inspirations |
| Product type | Cabinet pull |
| Style | Traditional |
| Available finishes | Satin Nickel, Caramel Bronze, Venetian Bronze |
| Available sizes | 3-3/4 in CC, 5-1/16 in CC, 6-5/16 in CC |
| Overall length / width / projection | 6-1/4 in to 8-5/8 in L; 11/16 in to 3/4 in W; 1-3/16 in projection (as printed by size) |
| Material | Zinc |
| Mounting | #8-32 x 1 in truss head machine screw included |
| Pack quantity | 10 per box |
Fit and Compatibility:
Mounts with #8-32 machine screws; the CC size must match the existing hole spacing in the drawer or door. Coordinates with other Amerock Inspirations Collection knobs and pulls.
Frequently Asked Questions (FAQ):
Q: What is included with each pull?
A: Each pull comes with a #8-32 x 1 in truss head machine screw; packaging quantity is 10 per box.
Q: How do I choose the right CC size?
A: CC (center-to-center) is the distance between the two mounting holes; measure your existing holes and match them to 3-3/4 in, 5-1/16 in or 6-5/16 in.
Q: Can I use it on both doors and drawers?
A: Yes, it mounts on cabinet doors and drawer fronts alike as long as the hole spacing matches.
Q: What is the pull made of?
A: It is a zinc pull in Satin Nickel, Caramel Bronze or Venetian Bronze.
Q: Do I need to drill new holes?
A: Only if the existing holes do not match one of the three CC sizes; otherwise it installs with the included screws.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Match the CC measurement of your existing hardware first; 3-3/4 in CC suits standard drawers while 6-5/16 in CC works well as an appliance-style or large drawer pull. For a cohesive kitchen, keep one finish across all Inspirations pieces and choose the longer lengths for drawers over 30 in wide. Hand-tighten the included #8-32 screws to avoid stripping the zinc threads.
Verify that mounting screws do not protrude through the inside of thin drawer fronts before final tightening.
Choose your size and finish of the Amerock Inspirations Collection zinc pull today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
