Amerock Crawford Collection Zinc Bar Pull 3-3/4 in or 6-5/16 in CC

$17.79

Orders start at $399 — combine any items to reach the minimum. Learn more

/
Shipping calculated at checkout.

Amerock Crawford Collection Zinc Bar Pull 3-3/4 in or 6-5/16 in CC

This Amerock Crawford bar pull is a traditional zinc cabinet pull offered in 3-3/4 in CC (4-11/16 in L) and 6-5/16 in CC (7-3/8 in L) sizes with Golden Champagne, Oil-Rubbed Bronze, or Satin Nickel finishes. Each pull includes a #8-32 x 1 in truss head machine screw. Pair with the Crawford round knob for a full set.

Key Features:

  • Traditional bar profile: Rounded traditional bar pull design suits classic and transitional cabinetry.
  • Two sizes: Choose 3-3/4 in CC or 6-5/16 in CC hole spacing to fit your drilling.
  • Three finishes: Golden Champagne, Oil-Rubbed Bronze and Satin Nickel options.
  • Zinc build: Die-cast zinc construction stands up to daily use.
  • Screws included: Each pull ships with a #8-32 x 1 in truss head machine screw.
  • Generous projection: 1-5/8 in projection on the larger size offers ample hand clearance.

Specifications Table:

Specification Details
Brand Amerock
Sell unit 1 piece
Collection Crawford
Product type Bar pull (Traditional style)
Available finishes Golden Champagne, Oil-Rubbed Bronze, Satin Nickel
Available sizes 3-3/4 in CC (4-11/16 in L x 11/16 in W) and 6-5/16 in CC (7-3/8 in L x 7/8 in W)
Overall length / width / projection 7-3/8 in L x 7/8 in W, 1-5/8 in projection (6-5/16 in CC size)
Base size 13/16 in Dia
Screw size #8-32 x 1 in
Material Zinc
Mounting Includes #8-32 x 1 in truss head machine screw
Pack quantity 10/Box

Fit and Compatibility:

Part of the Amerock Crawford Collection; pair with the Crawford 1-3/8 in Dia knob in matching finishes. Hole spacing must match existing 3-3/4 in or 6-5/16 in CC drilling.

Frequently Asked Questions (FAQ):

Q: What is included with each pull?
A: Each pull includes a #8-32 x 1 in truss head machine screw.

Q: Which sizes are offered?
A: 3-3/4 in CC with 4-11/16 in overall length and 6-5/16 in CC with 7-3/8 in overall length.

Q: Which finishes can I choose?
A: Golden Champagne, Oil-Rubbed Bronze and Satin Nickel.

Q: Which size should I pick?
A: Match your existing hole spacing; use the 6-5/16 in CC pull on wide drawers and the 3-3/4 in CC on standard drawers and doors.

Q: What is the material?
A: Die-cast zinc.

Q: How are they packaged?
A: Manufacturer packaging quantity is 10 per box.

Expert Verdict — Reviewed by the SuperArbor Pro Desk

Measure your existing center-to-center spacing before ordering; 3-3/4 in CC suits typical drawers while 6-5/16 in CC works on wide drawer banks and doors. Keep all Crawford pieces in one finish for a cohesive kitchen. Bar pulls project noticeably, so check adjacent-wall clearance on corner cabinets.

Confirm both screws are fully tightened so the pull cannot loosen and catch on clothing.

Choose your Amerock Crawford bar pull size and finish and order today.

*Third Party Trademarks

All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.

Subject to Approval & Availability
All orders are reviewed before fulfillment. You are not charged until your order is approved and ready to ship — and you may cancel at any time before that at no cost.

Why choose us

The Arbor Way

• Lowest Prices. Easy Online Shopping. Fast Delivery.

• No lines. No holds. No Hassles.

• America's Largest Inventory Network for All Home Improvement Supplies Nationwide.

• We deliver - town to town, door to door. 

Recently viewed