Skip to content
Air Vent Pro Flow Vented Drip Edge, .031 Aluminum Intake Vent, 10 ft. White
Regular price $53.00Orders start at $399 — combine any items to reach the minimum. Learn more
Air Vent Pro Flow Vented Drip Edge, .031 Aluminum Intake Vent, 10 ft. White
Air Vent's Pro Flow Vented Drip Edge combines drip edge with intake venting to solve intake ventilation on homes with little or no soffit area. Made of sturdy roll-formed aluminum increased to .031 in. thickness, over 50% thicker than most other drip edge vents, with a full 2 in. fascia wrap. Each piece is 10 ft. long, finished White, and sold individually.
Key Features:
- Intake where soffits can't: Delivers intake ventilation on homes with little or no soffit area by combining drip edge with venting.
- Extra-thick aluminum: Roll-formed aluminum at .031 in. thickness is more than 50% thicker than most other drip edge vents.
- Straighter nailing line: The added rigidity helps each 10-foot piece lay straighter for nailing.
- Full 2 in. fascia wrap: A full 2 inch fascia wrap is more than double most competitive vents.
- Contractor tested: Designed by engineers and tested by contractors in the field.
- 10 ft. pieces: Each 10-foot section covers a full rafter bay length for quick layout.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Air Vent |
| Sell unit | 1 piece, 10 ft. |
| Product line | Air Vent Pro Flow |
| Available colors | ['White'] |
| Available sizes | ['10 ft.'] |
| Material | Roll-formed aluminum |
| Dimensions | 10 ft. length per piece |
| Thickness | .031 in. |
| Finish / texture | White finish |
| Fascia wrap | 2 in. |
| Intended use | Intake ventilation combined with drip edge at the roof eave |
Coverage & How Much You Need:
Each 10 ft. piece covers 10 linear feet of eave. Measure the total eave length on both sides of the roof, divide by 10 ft., and round up to determine how many pieces to order.
Fit and Compatibility:
Pairs with ridge vents or other exhaust ventilation at the top of the roof to complete a balanced attic ventilation system. Installs along the eave in place of standard drip edge on homes lacking soffit intake.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 10 ft. piece of Pro Flow Vented Drip Edge in White.
Q: How many pieces do I need?
A: Measure your total eave length and divide by 10 ft.; order one piece for each 10 linear feet of eave.
Q: When should I use vented drip edge?
A: Use it when a home has little or no soffit area, since it provides intake ventilation right at the eave.
Q: How thick is the aluminum?
A: It is .031 in. thick, more than 50% thicker than most other drip edge vents.
Q: How much fascia does it cover?
A: It wraps a full 2 inches of fascia, more than double most competitive vents.
Q: Does it need an exhaust vent?
A: Yes, for balanced ventilation pair it with an exhaust vent such as a ridge vent at the roof peak.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Pro Flow is the go-to fix for intake-starved attics: where soffit vents are impossible, this vented drip edge brings air in at the eave without cutting the roof deck. The .031 gauge means it stays straight and nails down flat instead of wavering like thinner drip edge vents. Keep the vent slots unobstructed by underlayment and shingle starter course so air can actually enter the attic, and balance it with matching NFA at the exhaust.
Cut aluminum edges are sharp; wear gloves during handling and installation, and observe ladder and roof-edge fall-safety practices.
Order Air Vent Pro Flow Vented Drip Edge to add intake ventilation where soffits can't.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
