Skip to content
ACM Gravel Stop Grip Edge, 28 ga Galvanized Steel, 2x2, 2x4 and 3x3 in. Mill Profiles
Regular price $12.75Orders start at $399 — combine any items to reach the minimum. Learn more
ACM Gravel Stop Grip Edge, 28 ga Galvanized Steel, 2x2, 2x4 and 3x3 in. Mill Profiles
The ACM Gravel Stop Grip Edge line is 28 gauge galvanized steel gravel stop flashing sold per piece in mill finish. Profiles include 2 in. x 2 in., 2 in. x 4 in. and 3 in. x 3 in. Use it to stop loose gravel and shed water at roof edges on built-up and other low-slope systems.
Key Features:
- Gravel stop function: Retains roof gravel and surfacing at the roof edge while directing water off the deck.
- 28 gauge steel: All three variants are formed in 28 gauge galvanized steel.
- Three profile sizes: Offered in 2 in. x 2 in., 2 in. x 4 in. and 3 in. x 3 in. profiles.
- Mill finish: Bare galvanized mill finish across the line.
- Grip edge design: The gravel grip profile helps hold loose ballast at the perimeter.
- Sold per piece: Order pieces to match the total roof edge run.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | ACM |
| Sell unit | 1 piece |
| Product line | ACM Gravel Stop Grip Edge |
| Material | Galvanized steel |
| Thickness | 28 gauge |
| Available sizes | 2 in. x 2 in., 2 in. x 4 in., 3 in. x 3 in. |
| Available colors | Mill |
| Dimensions | Profiles as listed per variant |
| Intended use | Gravel stop edge flashing for low-slope and built-up roof edges |
Coverage & How Much You Need:
Each piece is one formed length of gravel stop; divide the roof perimeter by the per-piece length to get the piece count. Choose the 2 in. x 4 in. profile where a taller vertical face or wider horizontal leg is needed at the edge.
Fit and Compatibility:
Intended for gravel-surfaced and low-slope roof edges; pair with compatible base flashing and roofing membrane per the system detail. Piece length and cleat/anchoring method are not stated in the sources.
Frequently Asked Questions (FAQ):
Q: What profiles are available?
A: 2 in. x 2 in., 2 in. x 4 in. and 3 in. x 3 in., all in 28 gauge galvanized mill finish.
Q: What does a gravel stop do?
A: It holds loose gravel surfacing on the roof at the perimeter and sheds water off the edge.
Q: Is it suitable for shingle roofs?
A: Gravel stop is intended for gravel-surfaced and low-slope edges; use drip edge profiles for shingle roofs.
Q: How is it sold?
A: Per piece, so you can order the number of pieces needed for the perimeter.
Q: What gauge is it?
A: All variants are 28 gauge galvanized steel.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
On ballasted or built-up roofs, select the 3 in. x 3 in. profile where the cant or membrane termination needs more height, and the 2 in. x 4 in. where the horizontal leg must extend over the deck edge. Fasten per the roofing system manufacturer's edge securement requirements, since edge metal often has wind uplift provisions. Keep overlaps consistent and seal joints where the detail calls for it.
Wear cut-resistant gloves when handling sheet metal edge flashing, and follow roof edge securement and fall protection requirements during installation.
Order ACM 28 ga galvanized gravel stop grip edge in the profile your roof edge needs.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
