Skip to content
ACM Galvanized Reglet Counter Flashing, 26 Gauge, 4 in. and 6 in., Mill Finish
Regular price $27.90Orders start at $399 — combine any items to reach the minimum. Learn more
ACM Galvanized Reglet Counter Flashing, 26 Gauge, 4 in. and 6 in., Mill Finish
ACM Reglet Flashing is 26 gauge galvanized steel counter flashing designed to insert into a reglet or masonry joint and turn down over base flashing at roof-to-wall transitions. The line includes 4 in. and 6 in. face heights in mill finish. Each size is sold per piece.
Key Features:
- Reglet design: Formed to set into a reglet in masonry or concrete and hang down over base flashing.
- 26 gauge steel: Constructed from 26 gauge galvanized steel.
- Two face heights: Offered in 4 in. and 6 in. face widths.
- Mill finish: Mill galvanized finish for a workmanlike, paintable surface.
- Counter flashing role: Caps base flashing at roof-to-wall intersections to shed water away from the joint.
- Per piece: Sold individually by the piece for flexible job quantities.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | ACM |
| Sell unit | 1 piece |
| Product line | ACM Reglet Flashing |
| Available sizes | 4 in., 6 in. |
| Material | Galvanized steel |
| Finish / texture | Mill |
| Thickness | 26 ga |
| Dimensions | 4 in. or 6 in. face width |
| Intended use | Counter flashing at roof-to-wall and masonry transitions |
Coverage & How Much You Need:
Each piece covers a linear run of wall at one roof-to-wall junction; calculate total wall linear feet and order enough pieces to overlap joints along the run.
Fit and Compatibility:
Pairs with base flashing at masonry or concrete walls and works with a reglet or caulked joint at the top edge. Base flashing and sealant are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 26 gauge galvanized reglet flashing piece in the 4 in. or 6 in. size.
Q: Which size should I choose?
A: Use 4 in. for short down-leg coverage and 6 in. where the wall or base flashing requires a wider turn-down.
Q: How is it anchored?
A: The top edge sits in a reglet or masonry joint and is typically secured with sealant or anchoring per standard practice.
Q: Will it corrode?
A: It is galvanized steel, which resists corrosion in normal exterior exposure.
Q: Can it be cut on site?
A: Yes, galvanized sheet can be cut to length with tin snips; wear gloves when handling cut edges.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Choose 6 in. when the wall detail or stone coursing leaves a larger exposed area above the base flashing. Keep the reglet slot sealed after setting the metal so water cannot enter behind it. Do not mix galvanized counter flashing directly against bare copper without isolation, as dissimilar metals can promote corrosion.
Cut metal edges are sharp; wear gloves and eye protection when cutting and handling flashing.
Order ACM 26 gauge galvanized reglet flashing in 4 in. or 6 in. for your wall transition.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
