ThermoSoft WarmWalk 120 ft. x 18 in. 240-Volt Radiant Floor Heating Mat (Covers 180 sq. ft.)
Regular price $332.93WarmWalk radiant floor heating mats are typically installed in kitchens and bathrooms to make tile floors cozy and comfortable. WarmWalk can be used in new construction or remodeling to heat or supplement any room, addition or basement. WarmWalk floor heating mats are designed for fast and easy installation on virtually any subfloor and under any floor covering. Besides being ideally suited for all types of tile, marble, porcelain and stone floors, WarmWalk can be installed under carpet, vinyl, laminate and wood floors when imbedded in self-leveling cement. WarmWalk’s standard size mats are designed for easy on-site fitting to any floor. Since WarmWalk’s heating cable is factory spaced on rolls of fiberglass mesh, it reduces installation time. Simply roll out the mats and cut the mesh to turn WarmWalk in any direction to fit the floor. Lay tile as usual by troweling thin-set mortar over the heating mat. Openings in the heating mat grid allow the mortar to securely adhere the tile to the subfloor. If you prefer, you can skim coat or self-level over the mat and lay the tile in a second step. Once the mortar cures, connect the heating mats to the thermostat and power. No on-site splice connections or special tools are necessary. WarmWalk is designed to reduce electro-magnetic field (EMF) to a negligible level so there is no worry about interference with other electronic appliances. WarmWalk is UL Listed and safe for installation in showers.
- Standard mat width and length are stocked for immediate shipment and easy on-site fitting to any floor
- Combine multiple mats to fit your desired heated area up to 300 sq. ft. per thermostat (purchased separately)
- Add a power module (purchased separately) to increase your heated area in increments up to 300 sq. ft. each
- Factory-attached, hermetically sealed lead wires connect to household 220/240-Volt
- Lead wires on only one end of the mat facilitate mat layout and installation
- 1/8 in. thin heating cable imbeds in thinset mortar and minimizes raising the floor height
- Construction-grade fiberglass mesh provides an anti-fracture membrane that strengthens the floor and helps prevent grout line cracking
- Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
- Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
- Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
Features
| Wattage (watts) | 2160 |
| Material | Fiberglass Mesh |
| Flooring Product Type | Underfloor Heating |
| Product Weight (lb.) | 13.3 |
| Voltage (volts) | 240 |
| Total Square Footage Covered | 180 |
| Returnable | 180-Day |
| Product Length (ft.) | 120 |
| Product Thickness (in.) | 1/8 in |
| Product Width (in.) | 18 |
| Certifications and Listings | UL Listed |
| Manufacturer Warranty | 25 years |
By using our online store, you agree to be bound by this Copyright Policy. If you do not agree with any part of this policy, please do not use our online store.
Copyright Infringement Notification
If you believe that your copyrighted work has been infringed upon and is accessible on our online store, please notify us in writing by providing the following information:
1. A description of the copyrighted work you claim has been infringed, including the specific location on our website where the material is located.
2. Your name, address, telephone number, and email address.
3. A statement that you have a good faith belief that the use of the copyrighted material is not authorized by the copyright owner, its agent, or the law.
4. A statement, made under penalty of perjury, that the information in your notice is accurate and that you are the copyright owner or are authorized to act on behalf of the copyright owner.
5. A physical or electronic signature of the copyright owner or the person authorized to act on behalf of the owner of the copyright interest.
Please send your notification to our designated Copyright Agent at:
Arbor Home
Attn: Copyright Team
Legal@Arborhome.co
Upon receipt of a valid notification, we will take appropriate action, including removing or disabling access to the allegedly infringing content.
*Third Party Trademarks
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor Home's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
User-Generated Content
By submitting or posting any content on our website, you grant Arbor Home a non-exclusive, worldwide, royalty-free, perpetual, irrevocable, and fully sublicensable right to use, reproduce, modify, adapt, publish, translate, create derivative works from, distribute, and display such content throughout the world in any media. You represent and warrant that you own or otherwise control all of the rights to the content that you submit, and that the use of your content by Arbor Home will not infringe upon or violate the rights of any third party.
Changes to Copyright Policy
We may update this Copyright Policy from time to time at our sole discretion. We will notify you of any changes by posting the updated policy on this page. It is your responsibility to review this Copyright Policy periodically for any changes. Your continued use of our online store following the posting of any changes to this Copyright Policy constitutes your acceptance of those changes.
Contact Us
If you have any questions or concerns about this Copyright Policy, please contact us at Legal@arborhome.co
