Skip to content
TopShield Eave Tile Riser, 28 Ga Steel, 1-1/2" x 2-1/4" Charcoal or 1-1/2" x 4" Brown
Regular price $18.25Orders start at $399 — combine any items to reach the minimum. Learn more
TopShield Eave Tile Riser, 28 Ga Steel, 1-1/2" x 2-1/4" Charcoal or 1-1/2" x 4" Brown
The TopShield Eave Tile Riser is a 28-gauge steel closure used at the eave to support and set the rake of tile roofing. Two variants are offered: 1-1/2" x 2-1/4" in Charcoal and 1-1/2" x 4" in Brown, both 28 GA and sold per piece. Choose the size and color to match your tile roof's eave detail.
Key Features:
- Tile eave support: Rises the first course of tile at the eave for correct angle and alignment.
- 28-gauge steel: Formed from 28 GA steel for durable eave closure performance.
- Two profiles: Available in 1-1/2" x 2-1/4" and 1-1/2" x 4" sizes.
- Two colors: Charcoal and Brown finishes to coordinate with tile color.
- Sold per piece: Order the number of pieces your eave run requires.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | TopShield |
| Sell unit | 1 piece |
| Product line | TopShield Eave Tile Riser |
| Available colors | Charcoal; Brown |
| Available sizes | 1-1/2" x 2-1/4" 28 GA (Charcoal); 1-1/2" x 4" 28 GA (Brown) |
| Dimensions | 1-1/2" x 2-1/4" or 1-1/2" x 4" |
| Wire gauge | 28 GA |
| Material | Steel |
| Finish / texture | Charcoal or Brown |
| Intended use | Eave closure and tile riser for residential tile roofs |
Coverage & How Much You Need:
Pieces are installed along the eave line; determine pieces per eave by dividing your eave length by the riser's installed coverage, which the source does not state. Order a waste allowance for cutting and laps.
Fit and Compatibility:
Use with TopShield tile roofing systems and matching eave closures or bird stops at the eave detail. Confirm the correct riser height and color for your specific tile profile before ordering.
Frequently Asked Questions (FAQ):
Q: What sizes and colors are available?
A: 1-1/2" x 2-1/4" in Charcoal and 1-1/2" x 4" in Brown, both 28 gauge.
Q: What is the material?
A: 28-gauge steel forming.
Q: How is it sold?
A: Per individual piece; order the quantity needed for your eave run.
Q: Where is it used?
A: At the eave of tile roofs as a riser/closure to set the tile angle.
Q: Do I need fasteners?
A: Fasteners are not specified in the source; use appropriate roofing fasteners per your installer's practice.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Match the riser height to your tile profile's nose angle so the first course sets correctly at the eave; the 4" Brown riser suits taller tile setups while the 2-1/4" Charcoal fits lower profiles. Run riser along the full eave and coordinate color with the starter course. Confirm fastening spacing and closure pairing with the tile manufacturer's details.
Cut metal edges are sharp; wear cut-resistant gloves and eye protection during handling and installation.
Order TopShield Eave Tile Risers to set your tile roof's first course right at the eave.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
