Skip to content
Carlisle Sure-Seal EPDM Pressure-Sensitive Pipe Seals, for 1/2-6 in. Pipes, Black
Regular price $60.75Orders start at $399 — combine any items to reach the minimum. Learn more
Carlisle Sure-Seal EPDM Pressure-Sensitive Pipe Seals, for 1/2-6 in. Pipes, Black
Carlisle Sure-Seal pressure-sensitive pipe seals are cured, pre-molded EPDM flashing boots for pipes penetrating the roof membrane. Two sizes cover pipes from 1/2 in. to 3 in. and from 1 in. to 6 in. in diameter. Each seal has pre-applied SecurTAPE on the deck flange for easy installation; sold individually.
Key Features:
- Pre-molded boot: Cured, pre-molded EPDM flashing shaped for fast pipe penetration detailing with no field fabrication.
- Two size ranges: Available in two sizes to flash pipes from 1/2" to 3" (12–75 mm) and from 1" to 6" (25–150 mm) in diameter.
- SecurTAPE flange: Pre-applied SecurTAPE on the bottom of the deck flange affords easy installation and strong membrane bonding.
- Pressure-sensitive: No wet adhesive needed at the flange thanks to the pressure-sensitive backing.
- System matched: Designed for use with Carlisle's Sure-Seal and Sure-Tough EPDM membranes.
- Fast installation: Simplifies EPDM installations by eliminating cutting and fitting of the pipe boot.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Carlisle |
| Sell unit | 1 pipe seal |
| Product line | Carlisle Sure-Seal EPDM Pressure-Sensitive accessories |
| Available colors | Black |
| Available sizes | Fits 1/2"–3" (12–75 mm) pipe; fits 1"–6" (25–150 mm) pipe |
| Material | Cured, pre-molded EPDM flashing |
| Color / finish | Black |
| Dimensions | Deck flange with pre-applied SecurTAPE; flexible boot cone |
| Nominal size | 1/2–3 in. or 1–6 in. pipe range |
| Assembly | Pre-molded; pressure-sensitive SecurTAPE flange installation |
| Intended use | Flanging pipes penetrating EPDM membranes |
Fit and Compatibility:
Designed to be used with Carlisle Sure-Seal and Sure-Tough EPDM membranes. Sold as one pipe seal; membranes and other flashing accessories sold separately.
Frequently Asked Questions (FAQ):
Q: What pipe sizes do these seals fit?
A: Two sizes are available: one flashing pipes from 1/2 in. to 3 in. and one flashing pipes from 1 in. to 6 in. in diameter.
Q: What is included?
A: Each unit is one cured, pre-molded EPDM pipe seal with pre-applied SecurTAPE on the bottom of the deck flange.
Q: Do I need adhesive?
A: The SecurTAPE on the flange is pressure-sensitive, affording easy installation and strong membrane bonding without wet adhesive at the flange.
Q: Which membranes is it compatible with?
A: It is designed for use with Carlisle's Sure-Seal and Sure-Tough EPDM membranes.
Q: How do I choose the right size?
A: Measure the pipe's outside diameter and pick the size range that covers it; the flexible boot accommodates any pipe within the stated range.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Measure the pipe outside diameter before ordering and pick the smaller boot that fully covers the range, since a snug cone sheds water better. Clean and prime the membrane surface as required, set the seal over the pipe, and roll the SecurTAPE flange thoroughly to ensure full bonding. For pipe runs outside the 1/2–6 in. range or irregular penetrations, use Carlisle's pourable sealer pockets instead.
Follow the manufacturer's surface preparation and priming instructions and use rooftop fall protection when flashing penetrations.
Order Carlisle Sure-Seal EPDM Pressure-Sensitive Pipe Seals for quick, secure pipe penetration flashing.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
