Skip to content
Johns Manville 60 mil TPO Roofing Membrane, Tan, 10 ft x 100 ft Roll
Regular price $978.68Johns Manville 60 mil TPO Roofing Membrane, Tan, 10 ft x 100 ft Roll
This Johns Manville TPO roofing membrane is a single-ply thermoplastic olefin sheet for commercial low-slope roofs, supplied tan in a 60 mil thickness on a 10 ft x 100 ft roll. One roll covers about 1,000 sq ft before laps and seams, and the 10 ft width reduces seam count on open roof fields. It is part of the JM TPO roofing system.
Key Features:
- Wide 10 ft sheet: The 10 ft width covers more field area per seam than narrower rolls.
- Standard 60 mil gauge: The 60 mil thickness is a widely specified commercial TPO membrane gauge.
- Tan finish: Tan is the factory membrane color of this roll.
- Fully approved: FM Approved, UL Classified, Miami-Dade County Approved and conforming to ASTM D6878.
- System matched: Designed for Johns Manville TPO roofing systems with JM adhesives, insulation and flashings.
- High coverage: One roll covers roughly 1,000 sq ft before laps and seam welds.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 10 ft x 100 ft |
| Product line | JM TPO Roofing Systems |
| Color | Tan |
| Dimensions | 10 ft x 100 ft roll, 60 mil thickness |
| Thickness | 60 mil |
| Coverage per unit | Approximately 1,000 sq ft per roll before seams and laps |
| Material | Thermoplastic polyolefin (TPO) roofing membrane |
| Approvals | FM Approved; UL Classified; Miami-Dade County Approved; ASTM D6878 |
| Weight | 357 lb per roll |
| Intended use | Commercial low-slope single-ply roofing |
Coverage & How Much You Need:
One 10 ft x 100 ft roll covers roughly 1,000 sq ft of roof field before laps, seam welds and perimeter details. Divide the roof area by 1,000 and add waste for overlaps to size the job.
Fit and Compatibility:
This membrane is part of the Johns Manville TPO roofing system and pairs with JM TPO flashing membranes, insulation and cover boards, adhesives and fastening plates, all sold separately. Attachment method should follow JM system specifications.
Frequently Asked Questions (FAQ):
Q: What comes in one order?
A: One roll of JM 60 mil tan TPO membrane, 10 ft x 100 ft, weighing about 357 lb. Adhesives, fasteners and flashing accessories are sold separately.
Q: How much area does one roll cover?
A: About 1,000 sq ft before laps and seam allowances; order extra for overlaps and detailing.
Q: What approvals does it carry?
A: FM Approved, UL Classified, Miami-Dade County Approved, and it conforms to ASTM D6878.
Q: Why choose a 10 ft roll?
A: The wider sheet reduces the number of field seams on large, open roof areas compared with 5 ft rolls.
Q: Is installation a DIY job?
A: No, TPO welding and attachment should be performed per JM specifications and local code by qualified installers.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use 10 ft rolls on large open fields to minimize seam welding labor; keep 5 ft rolls on hand for detail areas and perimeters. Mechanically attached layouts should follow the JM fastening pattern drawings, and adhered work should use JM-approved urethane adhesives. Match flashing and membrane to the same JM TPO system to keep JM guarantee eligibility.
Hot-air welding, rooftop work at height and heavy 357 lb rolls require fall protection, mechanical handling or team lifting, and adherence to the manufacturer's instructions and local codes.
Order this Johns Manville 60 mil tan TPO membrane 10 ft roll to cover more field with fewer seams.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
