Skip to content
Johns Manville EPDM Membrane Anchor Bar, 1 in. x 10 ft Gray Batten Strip
Regular price $498.00Johns Manville EPDM Membrane Anchor Bar, 1 in. x 10 ft Gray Batten Strip
The JM EPDM Anchor Bar is a 1 in. wide, prepunched polymer batten strip with prepunched, counter-sunk GALVALUME-coated steel anchor bars, sold in gray 10 ft lengths. It is used to mechanically secure single-ply membranes in Johns Manville commercial roofing systems. Order per carton.
Key Features:
- Prepunched design: The batten strip is prepunched for faster, accurately aligned fastening.
- Counter-sunk bars: Prepunched, counter-sunk GALVALUME-coated steel anchor bars allow fastener heads to sit flush.
- Corrosion-resistant steel: GALVALUME coating on the steel bars provides corrosion protection.
- Single-ply use: Designed for use with single-ply membranes in commercial roofing systems.
- 1 in. width: The 1 in. wide strip provides a secure membrane batten bearing surface.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 carton of 1 in. x 10 ft anchor bars |
| Product line | JM EPDM roofing system accessories |
| Material | Polymer batten strip with GALVALUME-coated steel anchor bar |
| Color / finish | Gray |
| Dimensions | 1 in. x 10 ft |
| Nominal size | 1 in. wide, 10 ft long |
| Intended use | Membrane batten / anchor bar for single-ply membranes |
| Pack quantity | Carton |
Coverage & How Much You Need:
Each 10 ft bar secures 10 linear ft of membrane edge or seam; divide the total anchorage length by 10 ft to determine how many bars and the number of fasteners per JM's fastening patterns.
Fit and Compatibility:
Intended for Johns Manville single-ply (EPDM) membrane roofing systems; use with JM fasteners per the applicable JM fastening pattern. Fasteners and plates are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: Gray 1 in. x 10 ft membrane batten strips with prepunched, counter-sunk GALVALUME-coated steel anchor bars, sold by the carton.
Q: What material is the anchor bar?
A: GALVALUME-coated steel with a counter-sunk, prepunched pattern.
Q: What systems does it fit?
A: It is designed for use with single-ply membranes in JM commercial roofing systems.
Q: How many bars do I need?
A: Divide the total anchorage run in linear feet by 10 ft per bar and follow JM fastening patterns for fastener spacing.
Q: Are fasteners included?
A: The sources do not list fasteners with this item; fasteners are typically ordered separately to match JM fastening patterns.
Q: Why counter-sunk holes?
A: Prepunched, counter-sunk holes speed installation and let fasteners seat flush against the bar.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
These prepunched battens save significant labor on mechanically attached single-ply roofing because hole layout is already done. Match fastener type and spacing to JM's published fastening patterns for your deck type and wind zone. The GALVALUME coating resists corrosion, making the bars suitable for long-term membrane attachment.
Wear gloves when handling steel anchor bars; prepunched edges and cut ends can be sharp.
Order the JM EPDM Anchor Bar 1 in. x 10 ft gray batten strip for your next single-ply roof.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
