Skip to content
Johns Manville .080 PVC SD Plus Membrane 10 ft x 75 ft White Heat-Weldable Thermoplastic Roofing Membrane
Regular price $1,471.50Johns Manville .080 PVC SD Plus Membrane 10 ft x 75 ft White Heat-Weldable Thermoplastic Roofing Membrane
JM .080 PVC SD Plus is a heat-weldable thermoplastic PVC roofing membrane, supplied here as a white 10 ft x 75 ft roll in 80 mil thickness. A non-wicking polyester scrim adds tensile strength, and an aramid-reinforced fastening edge adds toughness at the attachments. White finish delivers exceptional reflectivity for energy savings.
Key Features:
- ASTM D 4434: Meets the requirements of ASTM D 4434, Type III.
- Aramid edge: Patented aramid-reinforced edge: aramid fiber is woven into the fastening side of all full rolls.
- Non-wicking scrim: Reinforced polyester scrim adds tensile strength and toughness; edge sealant is not required for cut edges.
- Chemical resistance: Inherently resistant to oils, air conditioning coolants, fuels, and grease.
- Energy savings: White membrane provides exceptional reflectivity and emissivity.
- Heat weldable: Thermoplastic PVC seams weld into a watertight assembly.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Johns Manville |
| Sell unit | 1 roll, 10 ft x 75 ft |
| Product line | PVC SD Plus |
| Dimensions | 10 ft x 75 ft roll |
| Material | Thermoplastic polyvinyl chloride (PVC) |
| Thickness | .080 in. (80 mil) |
| Color / finish | White |
| Available colors | White, Gray (line colors as printed) |
| Reinforcement | Non-wicking reinforced polyester scrim with patented aramid-reinforced fastening edge |
| Approvals | Meets the requirements of ASTM D 4434, Type III |
| Chemical resistance | Resistant to oils, air conditioning coolants, fuels, and grease |
| Intended use | Heat-welded single-ply low-slope roofing |
Coverage & How Much You Need:
Each 10 ft x 75 ft roll provides 750 ft² nominal coverage before laps. Deduct side laps and perimeter waste when estimating squares.
Fit and Compatibility:
Part of the Johns Manville PVC roofing system with 50, 60, and 80 mil options; use with JM insulation, fasteners and plates, and PVC flashing membrane. Adhesives, sealants, and termination bar are sold separately.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One white roll of JM .080 PVC SD Plus membrane, 10 ft x 75 ft.
Q: Do cut edges need sealing?
A: No, the non-wicking polyester reinforcement means edge sealant is not a requirement for cut edges.
Q: How much does a roll cover?
A: 750 ft² nominal (10 ft x 75 ft) before deducting laps and waste.
Q: Why choose 80 mil over 60 mil?
A: The heavier .080 gauge adds durability for roofs with more traffic or where longer service life is specified.
Q: Is it chemical resistant?
A: Yes, JM PVC is inherently resistant to oils, air conditioning coolants, fuels, and grease.
Q: What is the aramid edge for?
A: Aramid fiber is woven into the fastening side of full rolls to reinforce the membrane at mechanical attachments.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
PVC SD Plus is the pick where rooftop kitchen exhaust, grease, or coolant lines would attack an EPDM or TPO roof, since PVC tolerates those chemically. The .080 thickness suits higher-traffic and mechanically attached applications, and the aramid-reinforced fastening edge resists tear-out at plates. Weld seams with consistent temperature and probe-test every seam; white finish earns the energy savings on cooling-dominated buildings.
Hot-air welding tools present burn and fire hazards; follow manufacturer installation instructions and site fire safety procedures.
Order JM .080 PVC SD Plus membrane in white for a chemical-resistant, energy-saving single-ply roof.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
