Skip to content
GAF EverGuard Self-Adhered Flexible EPDM Flashing Tape, White, 6/9/12 in. x 50-100 ft. Rolls
Regular price $315.00Orders start at $399 — combine any items to reach the minimum. Learn more
GAF EverGuard Self-Adhered Flexible EPDM Flashing Tape, White, 6/9/12 in. x 50-100 ft. Rolls
GAF EverGuard Self-Adhered Flexible EPDM Flashing Tape is factory-built, uncured white EPDM flashing for TPO roofs, available in 6 in. x 100 ft., 9 in. x 50 ft. and 12 in. x 50 ft. rolls. It strips in TPO end laps and edge metal and handles challenging details without welding. One roll is the sell unit, and it is a time-saving alternative to field-welded flashing.
Key Features:
- No Welding Needed: Self-adhered EPDM flashing installs without the need for welding, saving time and labor.
- Detail Ready: Great for addressing challenging details and stripping-in TPO end laps and edge metal.
- Repair Friendly: Works well for patches and other roof repairs.
- Leak Reduction: Helps reduce the risk of leaks and callbacks.
- Uniform Look: Creates a uniform aesthetic on TPO roofs.
- Factory Built: Factory-built, easy-to-install flashing for consistent quality.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | GAF |
| Sell unit | 1 roll |
| Product line | EverGuard Self-Adhered Flexible EPDM Flashing |
| Material | Uncured EPDM, self-adhered |
| Color / finish | White |
| Available sizes | 6 in. x 100 ft., 9 in. x 50 ft., 12 in. x 50 ft. |
| Width | 6 in., 9 in. or 12 in. depending on variant |
| Length | 50 ft. (9 in. and 12 in. rolls) or 100 ft. (6 in. roll) |
| Intended use | TPO roof flashing, stripping-in end laps and edge metal, patches and repairs |
Coverage & How Much You Need:
Each roll covers its width times length; a 6 in. x 100 ft. roll strips 100 linear ft. of lap or detail, while a 9 in. or 12 in. x 50 ft. roll covers 50 linear ft. Select roll width so it overlaps both the detail edge and the TPO membrane per the GAF detail requirements.
Fit and Compatibility:
Designed for use on TPO roofs, including stripping-in TPO end laps and edge metal. Not stated for use with EPDM or other membranes in the source; compatible primers and detail accessories are sold separately.
Frequently Asked Questions (FAQ):
Q: What sizes are available?
A: Three variants: 6 in. x 100 ft., 9 in. x 50 ft. and 12 in. x 50 ft., all in white.
Q: Does this flashing need heat welding?
A: No, the self-adhered EPDM installs without welding, saving time and labor.
Q: What membrane is it for?
A: It is designed for use on TPO roofs, especially end laps, edge metal and challenging details.
Q: How much does one roll cover?
A: A 6 in. x 100 ft. roll covers 100 linear ft.; the 9 in. and 12 in. rolls each cover 50 linear ft.
Q: Can it be used for repairs?
A: Yes, it is well suited to patches and other roof repairs as well as new flashing details.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Keep uncured EPDM on hand for odd penetrations and edge-metal stripping where heat-welded details are awkward; the self-adhered backing speeds work on tricky transitions. Choose the 6 in. roll for laps and narrow details, stepping up to 9 in. or 12 in. where extra overlap is specified. Prime and clean the substrate per GAF detail requirements for dependable adhesion.
Work on completed TPO roofs requires fall protection and slip-resistant footwear; roll surfaces and wet membranes can be slippery.
Buy GAF EverGuard Self-Adhered EPDM Flashing Tape to strip in TPO details and laps without welding.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
