Skip to content
Manufacturer Varies by Location Hot Dipped Galvanized Roofing Nails – Flat Head, Smooth Shank, Diamond Point, 1-1/4" or 1-1/2"
Regular price $123.00Orders start at $399 — combine any items to reach the minimum. Learn more
Manufacturer Varies by Location Hot Dipped Galvanized Roofing Nails – Flat Head, Smooth Shank, Diamond Point, 1-1/4" or 1-1/2"
Hot dipped galvanized roofing nails for applying asphalt shingles, insulation board and felt to wood substrates. The large flat head and heavier shank gauge provide greater holding power, and the smooth shank with diamond point drives easily. Available in 1-1/4 in. and 1-1/2 in. lengths, sold by the box.
Key Features:
- Rust protection: Hot dipped galvanized coating protects against rust and corrosion.
- Large flat head: Flat head design provides greater holding power on shingles and felt.
- Heavy shank gauge: Heavier shank gauge increases pull-out resistance.
- Smooth shank: Smooth shank drives easily into wood substrates.
- Diamond point: Diamond point tip penetrates cleanly without splitting wood.
- Two lengths: Available in 1-1/4 in. and 1-1/2 in. lengths for different underlayment and shingle applications.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Manufacturer Varies by Location |
| Sell unit | 1 box |
| Product line | Hot Dipped Galvanized Roofing Nails |
| Available colors | Mill |
| Available sizes | 1-1/4"; 1-1/2" |
| Material | Steel, hot dipped galvanized |
| Finish / texture | Hot dipped galvanized |
| Length | 1-1/4 in. or 1-1/2 in. |
| Head | Flat head |
| Shank | Smooth shank |
| Point | Diamond point |
| Intended use | Applying roofing asphalt shingles, insulation board and felt to wood substrates |
Fit and Compatibility:
Designed for fastening asphalt shingles, insulation board and roofing felt to wood substrates. Suitable for hand nailing or use in coil and stick nailers only where the nail style matches the tool requirements.
Frequently Asked Questions (FAQ):
Q: What lengths are available?
A: This line offers 1-1/4 in. and 1-1/2 in. roofing nails.
Q: What are they used for?
A: They are used for applying roofing asphalt shingles, insulation board and felt to wood substrates.
Q: Why the large head?
A: The large head and heavier shank gauge provide greater holding power.
Q: Are they rust resistant?
A: Yes, they are hot dipped galvanized for rust protection.
Q: What shank and point style?
A: Smooth shank with a diamond point for easy driving.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Use 1-1/4 in. nails for standard shingle application over solid decking and step up to 1-1/2 in. when fastening through thicker underlayment or insulation board. Hot dipped galvanizing is the right choice for asphalt shingle work, resisting rust where the nail sits under wet shingle laps. Drive nails straight and flush—overdriven or angled nails reduce holding power and can void shingle wind warranties.
Wear safety glasses when hand nailing and keep fingers clear of the hammer face and nail head.
Order Hot Dipped Galvanized Roofing Nails for dependable shingle, felt and insulation board fastening.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
