Skip to content
Carlisle SynTec 5 in. HP-X Roofing Fasteners, Black, Carton of 1,000
Regular price $543.19Carlisle SynTec 5 in. HP-X Roofing Fasteners, Black, Carton of 1,000
These are Carlisle SynTec HP-X 5 in. roofing fasteners in black, shipped 1,000 per carton. The high-performance screw secures Carlisle single-ply membrane and insulation to steel or wood decks without pre-drilling. Install through an approved Carlisle plate using a clutch-drive electric screw gun.
Key Features:
- High pull-out resistance: Oversized heavy shank and #15 thread diameter provide enhanced pull-out resistance.
- Resists back-out: Miniature drill point and deep buttress threads contribute to exceptional resistance to back-out and pull-out.
- Corrosion resistant: CR-10 coating offers excellent corrosion resistance, surpassing the FM4470 corrosion test.
- No pre-drilling: No pre-drilling is necessary for wood and steel decks.
- Bulk carton: 1,000 fasteners per carton for larger roof areas.
- FM Approved: FM Approved per the listing standards.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Carlisle SynTec |
| Manufacturer model | 300616 |
| Sell unit | Carton of 1,000 fasteners |
| Product line | Carlisle SynTec HP-X Fastener |
| Length | 5 in. |
| Color | Black |
| Head | #3 Phillips truss head, 0.435 in. diameter |
| Thread | 0.265 in. diameter, 4 in. thread length |
| Shank | 0.202 in. diameter |
| Coating | CR-10 |
| Pack quantity | 1,000 fasteners per carton |
| Applicable standards | FM Approved; corrosion resistance surpasses FM4470 corrosion test |
| Deck compatibility | Steel decks (20-ga or 22-ga) or wood (min. 15/32 in. CDX plywood) |
| Intended use | Securing Carlisle single-ply membrane and insulation |
| Product weight, complete sell unit | 40 lb |
Coverage & How Much You Need:
One 5 in. fastener secures one plate-and-insulation point; fastener spacing follows Carlisle system specifications and the wind-uplift design for each roof zone.
Fit and Compatibility:
Designed for Carlisle single-ply membrane and insulation assemblies using approved Carlisle fastening plates, including RhinoBond systems. For use in 20-ga or 22-ga steel decks and minimum 15/32 in. CDX plywood; plates sold separately.
Frequently Asked Questions (FAQ):
Q: How many fasteners are in a carton?
A: 1,000 fasteners per box and per carton.
Q: Do I need to pre-drill?
A: No, the miniature drill point penetrates steel and wood decks without pre-drilling.
Q: What decks does it work in?
A: Steel decks of 20-gauge (0.91 mm) or 22-gauge (0.76 mm), or wood of minimum 15/32 in. (12 mm) CDX plywood.
Q: What tool installs it?
A: A standard clutch-drive electric screw gun (0-2,500 rpm) with a #3 Phillips bit.
Q: Is it corrosion resistant?
A: Yes, the CR-10 coating provides corrosion resistance that surpasses the FM4470 corrosion test.
Q: Are plates included?
A: No, use the fastener with an approved Carlisle plate, sold separately.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
The 5 in. HP-X suits thinner insulation build-ups where Carlisle's minimum deck-engagement requirements are still met; note it carries 4 in. of thread per the packaging chart. Drive perpendicular to the deck and into the top flutes of steel decks, and do not overdrive. Verify deck condition with a pull test on older or weathered roofs.
Wear eye protection during drilling and installation, and take care not to overdrive the fastener.
Order this 1,000-carton of Carlisle SynTec 5 in. HP-X fasteners for your next insulated single-ply roofing job.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
