Skip to content
Blue Point Zamac Nail-Drive Anchors 1/4 in. Mill Finish, 100/Box
Regular price $26.38Orders start at $399 — combine any items to reach the minimum. Learn more
Blue Point Zamac Nail-Drive Anchors 1/4 in. Mill Finish, 100/Box
Blue Point Zamac Nail-Drive Anchors are one-piece nail-drive concrete anchors for attaching to masonry and concrete. The line covers 1/4 in. diameters in lengths from 1 in. to 3 in., all mill finish and sold 100 anchors per box. Choose the length that matches your fixture thickness and embedment requirement.
Key Features:
- One-piece design: Each anchor is a single Zamac unit that drives directly into a predrilled hole with no separate plug or sleeve to handle.
- Six lengths: Available in 1 in., 1-1/4 in., 1-1/2 in., 2 in., 2-1/2 in. and 3 in. lengths, all 1/4 in. diameter.
- Contractor box: Each box contains 100 anchors, sized for a full day of fastening work.
- Mill finish: Anchors come in a mill finish suited to concealed masonry fastening.
- Versatile fastening: Suitable for fastening fixtures, plates and hardware to concrete, block and other masonry base materials.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Blue Point |
| Sell unit | 1 box of 100 anchors |
| Product line | Zamac Nail-Drive Anchors |
| Available sizes | 1/4 in. x 1 in., 1/4 in. x 1-1/4 in., 1/4 in. x 1-1/2 in., 1/4 in. x 2 in., 1/4 in. x 2-1/2 in., 1/4 in. x 3 in. |
| Available colors | Mill |
| Material | Zamac (zinc alloy) |
| Finish / texture | Mill |
| Diameter | 1/4 in. |
| Pack quantity | 100 anchors per box |
| Intended use | Fastening to concrete and masonry |
Fit and Compatibility:
These anchors install into predrilled holes in concrete, block and masonry. Confirm hole diameter and embedment depth against the anchor diameter and length you select; a hammer and correct-diameter carbide drill bit are required and sold separately.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One box of 100 nail-drive anchors in the size you select, all 1/4 in. diameter.
Q: Which length should I choose?
A: Match the anchor length to the fixture thickness plus the required embedment into the masonry; longer lengths like 2-1/2 in. or 3 in. suit heavier fixtures.
Q: How are these installed?
A: Drill a hole of the correct diameter and depth into the concrete or masonry, insert the anchor, and drive the nail portion with a hammer until it seats flush.
Q: Do they rust?
A: They are zinc alloy (Zamac) with a mill finish; for constant moisture or exterior exposure, verify suitability for your application before use.
Q: Can I mix sizes in one box?
A: No, each box contains one size; order separate boxes for each length your job requires.
Q: Is a special tool required?
A: No, only a hammer and a properly sized carbide-tipped drill bit for the pilot hole.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Nail-drive anchors are the fastest way to attach sill plates, electrical boxes, furring and roofing-related hardware to concrete or block. Drill the hole to the anchor diameter, blow out the dust, and drive the anchor flush without over-hammering, which can crack the Zamac body. Keep a couple of box sizes on hand; the 1-1/4 in. to 2 in. range covers most fixture work, while 3 in. handles thicker attachments.
Wear safety glasses and gloves when driving anchors; flying masonry chips and struck Zamac can cause injury.
Stock your truck with Blue Point Zamac Nail-Drive Anchors and never scramble for a masonry anchor mid-job.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
