Skip to content
AMSI Galvanized Panhead Wood Screws, #10, 3/4 in. to 1-3/4 in.
Regular price $440.00AMSI Galvanized Panhead Wood Screws, #10, 3/4 in. to 1-3/4 in.
AMSI Galvanized Panhead Wood Screws are economical wood fasteners with a T-17 saw point that cuts through sheet metal up to 20 gauge with no pre-drilling, available in 3/4 in., 1 in., and 1-3/4 in. lengths in #10 sizes. The asymmetrical thread design dramatically increases pull-out values over traditionally threaded fasteners. Boxes are packed from 3,500 to 6,000 screws depending on size.
Key Features:
- T-17 saw point: The T-17 saw point easily cuts through sheet metal up to 20 gauge with no pre-drilling.
- High pull-out: Asymmetrical thread design dramatically increases pull-out values over traditionally threaded fasteners.
- Panhead design: Panhead screw style widely used for metal-to-wood fastening.
- Drive options: Offered with either combo drive or square drive.
- Galvanized: Galvanized finish for corrosion resistance.
- Bulk boxes: Box quantities range from 3,500 to 6,000 screws depending on length.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | AMSI Supply |
| Sell unit | 1 box of screws (3,500-6,000 count by size) |
| Product line | AMSI Galvanized Panhead Wood Screws |
| Available sizes | 3/4 in. #10 (5,000/box), 1 in. #10-12 (6,000/box), 1-3/4 in. #10 (3,500/box) |
| Size options | 3/4 in., 1 in., 1-3/4 in.; #10 and #10-12 |
| Head type | Panhead |
| Point type | T-17 saw point |
| Material | Galvanized steel |
| Finish / texture | Mill (galvanized) |
| Drive | Combo drive or square drive (offered by item) |
| Sheet metal capacity | Cuts through sheet metal up to 20 ga with no pre-drilling |
| Pack quantity | Varies by size: 3,500 to 6,000 screws per box |
| Intended use | Metal-to-wood and wood fastening for roofing and exterior applications |
Fit and Compatibility:
Designed for fastening sheet metal and metal roofing panels up to 20 gauge to wood substrates. Choose the length that matches your panel thickness and required wood embedment.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One sell unit is a box of screws; quantities are 5,000 for 3/4 in., 6,000 for 1 in., and 3,500 for 1-3/4 in., depending on the size selected.
Q: What sizes are available?
A: This line lists 3/4 in. #10, 1 in. #10-12, and 1-3/4 in. #10 panhead screws.
Q: Do I need to pre-drill?
A: No, the T-17 saw point cuts through sheet metal up to 20 gauge with no pre-drilling.
Q: What finish do they have?
A: The screws are galvanized with a mill finish for corrosion resistance.
Q: What drive do they use?
A: AMSI panhead screws are offered with either combo drive or square drive.
Q: Why the asymmetrical thread?
A: It dramatically increases pull-out values over traditionally threaded fasteners.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Panhead screws with T-17 saw points are a workhorse choice for corrugated and ribbed metal panels over purlins or decking, since they drill through the metal and bite into wood in one operation. Match length to panel gauge plus needed embedment: shorter 3/4 in. screws for thin flashing, 1-3/4 in. for deeper wood penetration. Galvanized finish suits most exterior wood-framed metal roofing uses.
Wear gloves and eye protection when handling and driving screws; fastener points and cut metal edges are sharp.
Order AMSI Galvanized Panhead Wood Screws in bulk boxes from 3/4 in. to 1-3/4 in. today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
