Skip to content

Topic

Sourcing

Page 3

  1. 9 min read

    Cabinet Freight and Damage: Inspect Before You Sign

    A clean signature usually waives your damage claim. Delivery types explained, the inspection sequence that protects a claim, and what to do when one box is crushed.

  2. 8 min read

    Medicine Cabinets: Recessed vs Surface Mount Sourcing

    A 16-inch on-center stud bay caps a recessed cabinet at about 14.5 inches. How to investigate the wall, read rough opening specs, and plan lighting and vanity storage.

  3. 8 min read

    Drawer Slides Compared: Side-Mount, Undermount, Load Ratings

    Side-mount slides need exactly half an inch per side; undermounts need a drawer box built to spec. Extension, load ratings, brands, and the retrofit reality.

  4. 8 min read

    Framed vs Frameless Cabinets: Overlay, Access, Hardware

    Framed or frameless decides overlay, interior opening width and which hinges and slides you can buy. Full comparison of overlay types, 32mm boring and install.

  5. 8 min read

    The Complete Kitchen Remodel Materials List

    Every line item in a kitchen package — cabinets, countertops, sink, faucet and hardware — plus the forgotten parts, what a supplier needs to quote it, and the order dependencies.

  6. 8 min read

    Matching Discontinued Windows and Doors on a Partial Job

    One failed window in a run of twenty: identify the unit from its glass etching and jamb label, then compare glass-only, sash kit, insert and full-frame routes.

  7. 8 min read

    Natural Stone vs Porcelain: Sourcing Marble and Stone-Look Tile

    Marble, travertine, limestone, slate and quartzite versus stone-look porcelain: etching, sealing, lot and block variation, setting materials and 2026 cost ranges.

  8. 8 min read

    Schluter Sourcing: DITRA, KERDI and a Complete Tile Assembly

    How to order Schluter as a system: DITRA vs KERDI, uncoupling vs waterproofing, the unmodified mortar rule, shower kits, and the full parts list for one release.

  9. 8 min read

    Sourcing Discontinued Lighting, Trims, Breakers and Devices

    Retired recessed trims, decorative fixtures, breakers and devices each substitute differently. Match by aperture, CCT, panel label and UL listing, not by brand.

  10. 8 min read

    How to Match Discontinued Cabinets, Doors, Pulls and Finishes

    Identify a discontinued cabinet line from its label, compare the three realistic match strategies, and substitute pulls, hinges and slides by dimension.

  11. 8 min read

    Tile Trim and Edge Profiles: Why Bullnose Availability Decides

    Many tile lines ship with no matching bullnose. Compare ceramic trim, metal and PVC profiles, and mitered edges, plus profile sizing, corners and trim lead time.

  12. 8 min read

    Discontinued Plumbing: Repair Parts for Retired Faucets and Valves

    How to identify an unknown faucet or valve, find cartridges and trim for discontinued fixtures, and decide between a repair, a trim kit and a rough-in valve swap.