Skip to content

Topic

Specification

Page 2

  1. 8 min read

    RTA vs Assembled Cabinets: Real Cost, Labor, Freight Math

    The box price is the least useful number. Assembly minutes per box, freight class and cube, damage rates, and when each format actually wins on a real job.

  2. 8 min read

    Cabinet Finishes Explained: Thermofoil, Laminate, Paint

    What thermofoil, laminate, catalyzed paint and stained finishes actually are, how each fails, which can be repaired, and the cleaners that void finish warranties.

  3. 8 min read

    Countertop Materials Compared: Quartz to Laminate

    Quartz scorches, granite needs sealing, butcher block fails at the sink cutout and laminate cannot be repaired. Compare five materials plus thickness, edges, seams and fabrication cost.

  4. 8 min read

    Door Hardware Grades: ANSI/BHMA Grade 1, 2 and 3 Explained

    What ANSI/BHMA A156 grades actually test, where each grade belongs by opening type, backset and bore dimensions, handing, and BHMA finish codes 605 through 630.

  5. 8 min read

    Retrofitting Cabinet Hardware: Old Holes, Backplates, Re-Drilling

    New pulls rarely match old holes. Measure the existing CTC, then choose between matching it, covering it with a backplate, or filling and re-drilling.

  6. 8 min read

    Plywood vs Particleboard vs MDF Cabinet Boxes

    The honest engineering comparison of cabinet box materials: screw holding, moisture response, flatness, weight, ANSI grades and what all-plywood construction hides.

  7. 8 min read

    Cabinet Lead Times: Stock, Semi-Custom and Custom Explained

    Four tiers set the timeline, finishing is the bottleneck, and the clock starts at release, not quote acceptance. Plus the countertop dependency that magnifies a slip.

  8. 8 min read

    Buying Fasteners, Anchors and Adhesives in Bulk for a Jobsite

    How fasteners are actually sold, the drive-thread-coating spec that decides the order, why treated lumber corrodes zinc, anchors by substrate, and bulk consumption estimating.

  9. 8 min read

    Cabinet Hardware Finishes: Satin vs Brushed Nickel vs Steel

    Three brands' satin nickel will not match. What each finish actually is, the BHMA finish codes, living finishes, PVD, and how to keep a whole kitchen consistent.

  10. 8 min read

    Cabinet Door Styles Decoded: Shaker, Slab, Raised, Inset

    Five-piece, slab and applied-moulding construction compared: cost, wood movement, cleaning, why painted wood doors crack at the joint, and how to match years later.

  11. 8 min read

    How to Take Off a Kitchen: Measuring Before You Quote

    A four-pass method for measuring a kitchen: room dimensions at counter height, obstructions from one reference corner, standard cabinet sizes, and countertop and hardware counts.

  12. 9 min read

    Cabinet Freight and Damage: Inspect Before You Sign

    A clean signature usually waives your damage claim. Delivery types explained, the inspection sequence that protects a claim, and what to do when one box is crushed.