Inquiry only
Product information and inquiries only. Stock has not been confirmed. This page does not accept payment or place an order. Sending an inquiry does not reserve stock or create an order.
Marshalltown SS21 is a SharpShooter 2.1 texture hopper-gun kit with a 2-gallon hopper and seven orifice sizes. Adjust airflow at the gun with the ball-valve air-line coupler. The angled hopper adapter helps keep the hopper level for floor and ceiling work.
- Brand
- Marshalltown
- Model / manufacturer part number
- SS21
- SKU
- MTN.SS21
Key specifications
- Manufacturer part number
- SS21
- Hopper capacity
- 2 gal
- Air supply for most materials
- At least 7 CFM at 25 psi, continuous
- Orifice sizes
- Seven
- Adjustment
- Knurled knobs; no wrench required
- Airflow adjustment
- Ball-valve air-line coupler at the gun
- Hopper adapter
- Angled design
- Sell unit
- Each
- Material-flow adjustment
- Adjustment knob
- Pattern test
- Test on scrap sheetrock or cardboard before spraying finished product
Compatibility and use
Select the texture and orifice setup for the job. Use the adjustment knob to set material flow, and test the pattern on scrap sheetrock or cardboard before spraying the finished surface. Hopper capacity is volume, not a coating coverage rate.
Frequently asked questions
How much material does the hopper hold?
The hopper has a 2-gallon capacity.
How many orifice sizes are available?
The gun offers seven orifice sizes for different texture patterns.
Do I need a wrench to adjust the orifice plate?
No. Knurled knobs allow adjustment without a wrench.
Where is airflow adjusted?
Adjust airflow with the ball-valve air-line coupler at the gun. Reduced airflow produces a coarser texture; increased airflow produces a finer texture.
What is the angled hopper adapter for?
It helps keep the hopper level while spraying floors and ceilings.
Product expert notes
Adjust airflow at the gun’s ball-valve air-line coupler, then use the adjustment knob to set material flow and consistent texture. Test the pattern on scrap sheetrock or cardboard before spraying the finished surface. The angled adapter helps keep the hopper level for floor or ceiling spraying.
Ask about this product
Include the model, SKU and your application so we can understand your question.
You can also email hello@superarbor.com. Your email app opens when you use the inquiry link.
An inquiry is not an order, a stock reservation or a payment authorization.