3/4 in. Red PEX-A Expansion Pipe, 100 ft.

Durable, flexible PEX-A tubing designed for potable water systems and hot water distribution. The full-flow design and reduced coil memory simplify runs with fewer fittings while resisting corrosion and cracking. Rated for demanding temperatures and pressures in residential or commercial plumbing.

---

Key Features:

• Superior Flexibility: PEX-A material bends easily for fewer joints and leak points
• Full-Flow Performance: Expanded connections maintain maximum water output
• Heat-Repairable: Kinks can be repaired with heat to avoid extra couplings
• High Temperature/Pressure Rating: Up to 200°F and 160 psi for tough applications
• Corrosion Resistant: Cross-linked polyethylene resists scale and degradation

Please check the Product Data Sheet Here

---

Specifications Table:

Specification	Details
Application	Potable Water
Color	Red
Connectivity	Barb; compatible with expansion, crimp, clamp, or sleeve methods
Material	Cross-Linked Polyethylene (PEX-A)
Maximum Flow Rate	2.3 GPM
Maximum Working Temperature (F)	200
Maximum Working Pressure (psi)	160
Minimum Working Temperature (F)	-40
PEX Type	A
Pack Size	1
Pipe Features	Corrosion Resistant, Ductile, Flexible
Product Weight (lb.)	10.45
Actual Inside Diameter (in.)	0.671
Actual Outside Diameter (in.)	0.875
Nominal Inside Pipe Diameter (in.)	3/4
Pipe Wall Thickness (in.)	0.102
Product Length (ft.)	100
Certifications and Listings	ANSI, ASTM, CSA Listed, NSF Listed; CSA B137.12; cNSFus-pw
Manufacturer Warranty	25 Years (for exclusive use with ASTM F1960 fittings)
Maximum Pressures/Temperatures	160 psi @ 73.4°F; 100 psi @ 180°F; 80 psi @ 200°F
System Compatibility	Compatible with Uponor and Wirsbo PEX systems; Tectite by Apollo push-to-connect
Installation Environments	In concrete, gypsum-based lightweight concrete, sand, asphalt, under wood flooring, behind wallboard or plaster

---

Frequently Asked Questions (FAQ):

Q: What fittings are compatible?
A: Use ASTM F1960 expansion fittings; also compatible with crimp, clamp, or sleeve methods and Tectite by Apollo push-to-connect fittings.

---

Q: Is this suitable for potable water?
A: Yes. It is listed for potable water applications and meets NSF standards.

---

Q: What are the temperature and pressure ratings?
A: 160 psi at 73.4°F, 100 psi at 180°F, and 80 psi at 200°F.

---

Q: Can it be used for radiant or in-slab installs?
A: Yes, it may be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, under wood flooring, or behind walls.

---

Q: What is the inner and outer diameter?
A: Approx. 0.671 in. ID and 0.875 in. OD with 0.102 in. wall thickness.

---

Streamlined Utility in Bold Hot-Water Red

This vibrant red PEX-A coil brings a crisp, architectural clarity to utility runs, turning the unseen into a study of clean lines. Its supple bend radius creates uninterrupted paths, a quiet luxury behind the walls. Pair with brass manifolds for a refined, engineered look in exposed utility rooms. It’s the discreet backbone of a high-performing, modern home.

---

Upgrade your plumbing with flexible, full-flow PEX-A performance—add this 100 ft. coil to your project today.

Warranty

Installation