{"product_id":"versico-versigard-epdm-quick-applied-termination-strip-9-in-x-100-ft-black","title":"Versico VersiGard EPDM Quick-Applied Termination Strip, 9 in. x 100 ft., Black","description":"\u003ch1\u003eVersico VersiGard EPDM Quick-Applied Termination Strip, 9 in. x 100 ft., Black\u003c\/h1\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eThe Versico VersiGard Quick-Applied Termination Strip (QA RTS) is a 9-inch-wide, 100-foot-long black reinforced EPDM strip with pre-applied cured splice tape along both edges for membrane securement. This 45 mil strip bonds in place without wet adhesive for fast horizontal installation. Use it for membrane securement in the field of mechanically attached EPDM systems.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-applied tape:\u003c\/strong\u003e Nominal 30 mil (0.75 mm) cured EPDM splice tape adhesive is laminated along both edges of the strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45 mil membrane:\u003c\/strong\u003e Reinforced EPDM membrane strip is nominal 45 mil (1.1 mm) thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField securement:\u003c\/strong\u003e The 9 in QA RTS is used for membrane securement in the field of the roof on mechanically attached systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal install:\u003c\/strong\u003e The 9 in width with tape on both edges is designed for horizontal installation only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 ft roll:\u003c\/strong\u003e Each unit is a 9 in x 100 ft length of termination strip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications Table:\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVersico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 strip, 9 in x 100 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVersiGard EPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReinforced EPDM with cured EPDM splice tape adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor \/ finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNominal size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 in x 100 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNominal 45 mil (1.1 mm) membrane; nominal 30 mil (0.75 mm) adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 in (225 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdhesive width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 in (75 mm) strips along both edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHorizontal only (9 in version); 6 in version installs horizontally or vertically\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMembrane securement in the field of mechanically attached EPDM systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature note\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLoss of adhesive tack if stored or used below 40 F (4 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eCoverage \u0026amp; How Much You Need:\u003c\/h2\u003e\u003cp\u003eOne unit covers approximately 100 linear feet of securement in a single strip, 9 in wide. The 6 in QA RTS covers the same length at walls, curbs and expansion joints where one taped edge is sufficient.\u003c\/p\u003e\u003ch2\u003eFit and Compatibility:\u003c\/h2\u003e\u003cp\u003eDesigned for Versico VersiGard EPDM single-ply roofing systems, including mechanically attached installations. The 6 in QA RTS variant (tape on one edge) suits perimeter securement at walls, curbs and expansion joints; both install on prepared EPDM membrane surfaces.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions (FAQ):\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in one unit?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e One 9 in x 100 ft black QA RTS strip with pre-applied splice tape on both edges.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How wide and thick is the strip?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The reinforced EPDM membrane is nominal 45 mil (1.1 mm) thick and 9 in (225 mm) total width; adhesive strips are 3 in (75 mm) wide.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Where is the 9 in strip used versus the 6 in?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 9 in strip secures membrane in the field of mechanically attached systems; the 6 in version adds perimeter securement at walls, curbs and expansion joints.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How must it be installed?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The 9 in version with tape on both edges installs horizontally only; the 6 in version can run horizontally or vertically.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can it be applied in cold weather?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, storage or use below 40 F (4 C) causes loss of adhesive tack.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eExpert Verdict — Reviewed by the SuperArbor Pro Desk\u003c\/h2\u003e\u003cp\u003eQA RTS replaces tape-and-primer termination details with a single peel-and-press operation, so keep surfaces clean, dry and primed per the membrane manufacturer's requirements before pressing. Roll the strip firmly along both taped edges to achieve full contact. Reserve it for mechanically attached field securement and use the 6 in version at perimeters and curbs; never apply below 40 F.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCut membrane and strip edges are sharp; wear gloves and keep primer and solvent away from ignition sources.\u003c\/em\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eOrder the Versico VersiGard EPDM 9 in x 100 ft Quick-Applied Termination Strip for fast field securement.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Versico","offers":[{"title":"Default Title","offer_id":67583373836655,"sku":"VERE9QARTS","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3499\/7051\/files\/ProductImage_VERE6QARTS_d59ba574-5839-4c8c-b704-a718be681d60.jpg?v=1790406966","url":"https:\/\/superarbor.io\/products\/versico-versigard-epdm-quick-applied-termination-strip-9-in-x-100-ft-black","provider":"Super Arbor","version":"1.0","type":"link"}