{"product_id":"johns-manville-pvc-sd-plus-60-mil-membrane-10-ft-x-100-ft-gray-reinforced-pvc-single-ply-r","title":"Johns Manville PVC SD Plus 60 Mil Membrane 10 ft. x 100 ft. Gray Reinforced PVC Single-Ply Roofing Roll","description":"\u003ch1\u003eJohns Manville PVC SD Plus 60 Mil Membrane 10 ft. x 100 ft. Gray Reinforced PVC Single-Ply Roofing Roll\u003c\/h1\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eJohns Manville PVC SD Plus is a heat-weldable, reinforced thermoplastic PVC single-ply roofing membrane supplied as one gray 60 mil roll measuring 10 ft. x 100 ft. The non-wicking polyester scrim reinforcement adds tensile strength and toughness, and the membrane is designed for fully adhered or mechanically fastened commercial low-slope roofing systems with compatible JM accessories.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-weldable seams:\u003c\/strong\u003e Thermoplastic PVC formulation allows sheet and lap seams to be hot-air welded for a continuous roof surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode-listed compliance:\u003c\/strong\u003e Meets the requirements of ASTM D 4434, Type III for PVC roofing sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-wicking scrim:\u003c\/strong\u003e Reinforced polyester scrim provides tensile strength and toughness; edge sealant is not required for cut edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy savings:\u003c\/strong\u003e White membranes in the line deliver exceptional reflectivity and emissivity for energy savings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid-reinforced edge:\u003c\/strong\u003e Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple thicknesses:\u003c\/strong\u003e PVC SD Plus is also available in 50 and 80 mil for different project demands.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications Table:\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJohns Manville\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 roll, 10 ft. x 100 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJM PVC SD Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReinforced thermoplastic polyvinyl chloride (PVC) with polyester scrim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor \/ finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 ft. x 100 ft. per roll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets ASTM D 4434, Type III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGray (white also offered in the PVC SD Plus line)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 mil listed; line also available in 50 and 80 mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoll dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 ft. x 100 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeam type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHeat-weldable thermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEdge detail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePatented aramid-reinforced edge on fastening side of full rolls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChemical resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResistant to oils, air conditioning coolants, fuels and grease\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut edges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEdge sealant not required for cut edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eCoverage \u0026amp; How Much You Need:\u003c\/h2\u003e\u003cp\u003eOne roll measures 10 ft. x 100 ft., covering approximately 1,000 sq. ft. of roof deck before laps and allowances. Estimate roll count from field area plus extra for laps, flashing details and waste.\u003c\/p\u003e\u003ch2\u003eFit and Compatibility:\u003c\/h2\u003e\u003cp\u003eUse with Johns Manville PVC SD Plus system components including insulation, fasteners, plates, sealants and welding accessories in matching system specifications. Adjoining sheets are joined by hot-air welding; JM system accessories are sold separately.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions (FAQ):\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included with the order?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e One roll of JM PVC SD Plus 60 mil gray membrane measuring 10 ft. x 100 ft. Field fasteners, plates, adhesives and accessories are sold separately.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How much area does one roll cover?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A roll covers roughly 1,000 sq. ft. before laps and waste; plan additional material for seam laps, penetrations and perimeter details.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Do cut edges need sealing?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. With the non-wicking reinforced polyester scrim, edge sealant is not a requirement for cut edges.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Is this membrane code compliant?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It meets the requirements of ASTM D 4434, Type III, the standard for PVC roofing sheet.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why choose PVC over other single-ply options?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e PVC is inherently resistant to oils, coolants, fuels and grease, making it a strong choice for restaurants and buildings with chemical-laden rooftop discharge.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can the seams be welded?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. It is a heat-weldable thermoplastic membrane, so laps and details are hot-air welded.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eExpert Verdict — Reviewed by the SuperArbor Pro Desk\u003c\/h2\u003e\u003cp\u003eChoose 60 mil when traffic, chemical exposure or long service life justify stepping up from 50 mil. The gray sheet suits projects where the roof is visible from nearby buildings; white is the pick where cooling savings drive the specification. Weld full rolls using the aramid-reinforced fastening edge, and keep laps clean and dry for the strongest weld.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eHot-air welding equipment and rooftop work carry burn and fall hazards; follow OSHA fall-protection and manufacturer welding guidelines.\u003c\/em\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eOrder the Johns Manville PVC SD Plus 60 mil membrane today and build a tough, chemically resistant low-slope roof.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Johns Manville","offers":[{"title":"Default Title","offer_id":67583434850671,"sku":"JM70009110","price":1460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3499\/7051\/files\/JM70009110_0.jpg?v=1790407197","url":"https:\/\/superarbor.io\/products\/johns-manville-pvc-sd-plus-60-mil-membrane-10-ft-x-100-ft-gray-reinforced-pvc-single-ply-r","provider":"Super Arbor","version":"1.0","type":"link"}