{"product_id":"johns-manville-mbr-bonding-adhesive-two-part-solvent-free-cold-application-adhesive-for-sb","title":"Johns Manville MBR Bonding Adhesive, Two-Part Solvent-Free Cold-Application Adhesive for SBS Membranes","description":"\u003ch1\u003eJohns Manville MBR Bonding Adhesive, Two-Part Solvent-Free Cold-Application Adhesive for SBS Membranes\u003c\/h1\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eJM MBR Bonding Adhesive is a two-part, solvent-free elastomeric cold-application adhesive for installing SBS modified bitumen roof membranes and insulation or cover board. This listing is the 0.6 gal activator component. It is a direct substitute for hot asphalt where hot application is prohibited or impractical.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold Application:\u003c\/strong\u003e Two-part elastomeric adhesive applies cold, with no hot asphalt or kettles needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent Free:\u003c\/strong\u003e 100% solids formulation contains no volatile organic compounds (VOCs).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Odor:\u003c\/strong\u003e Low odor with a fast set time, well suited to occupied buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Application Window:\u003c\/strong\u003e Can be applied over wide temperature and humidity ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWind Uplift Strength:\u003c\/strong\u003e High strength with exceptional wind uplift performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot Asphalt Substitute:\u003c\/strong\u003e Used as a direct substitute for hot asphalt for membranes and insulation\/cover board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications Table:\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJohns Manville\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 ea, 0.6 gal activator component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJM MBR Bonding Adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack to Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.6 gal activator component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-part elastomeric cold-application adhesive, 100% solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish \/ texture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCures black to brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApplying SBS cold-applied membranes and insulation\/cover board; direct substitute for hot asphalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eCoverage \u0026amp; How Much You Need:\u003c\/h2\u003e\u003cp\u003eCoverage is not stated in the sources and depends on the membrane and substrate; follow the mixing ratio and spread rate on the manufacturer's technical data sheet when estimating.\u003c\/p\u003e\u003ch2\u003eFit and Compatibility:\u003c\/h2\u003e\u003cp\u003eDesigned for bonding SBS modified bitumen membranes and for adhering insulation or cover board in cold-applied multi-ply systems. Sold as the 0.6 gal activator component of a two-part system; the base component and membranes are sold separately.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions (FAQ):\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e This order is the 0.6 gal activator component of the two-part MBR Bonding Adhesive system.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Is this a two-part adhesive?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it is a two-part, solvent-free elastomeric cold-application adhesive; mix components per the manufacturer's ratio before use.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What does it bond?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It installs SBS cold-applied membranes and adheres insulation or cover board, working as a direct substitute for hot asphalt.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Does it contain VOCs?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the 100% solids formulation contains no volatile organic compounds and is low odor.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can it be applied in varied weather?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it can be applied over wide temperature and humidity ranges.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How is its wind performance?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It is high strength with exceptional wind uplift performance.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eExpert Verdict — Reviewed by the SuperArbor Pro Desk\u003c\/h2\u003e\u003cp\u003eMBR Bonding Adhesive is the go-to when hot asphalt is prohibited, undesirable or impractical, such as on occupied or sensitive buildings. Because it is 100% solids, coverage depends on applied film thickness, so meter the mix carefully and follow the manufacturer's spread rate. Mix full kits and observe the fast set time to avoid waste.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eTwo-part chemical adhesives require gloves, eye protection and good ventilation during mixing and application; follow the safety data sheet.\u003c\/em\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eOrder JM MBR Bonding Adhesive for strong, cold-applied bonding of SBS modified bitumen membranes.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Johns Manville","offers":[{"title":"Default Title","offer_id":53524435927407,"sku":"JMMBRBA","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3499\/7051\/files\/JMMBRBA_0.png?v=1790284051","url":"https:\/\/superarbor.io\/products\/johns-manville-mbr-bonding-adhesive-two-part-solvent-free-cold-application-adhesive-for-sb","provider":"Super Arbor","version":"1.0","type":"link"}