{"product_id":"johns-manville-080-pvc-sd-plus-min-membrane-80-mil-white-10-ft-x-75-ft-roll","title":"Johns Manville .080 PVC SD Plus MIN Membrane, 80 mil White, 10 ft x 75 ft Roll","description":"\u003ch1\u003eJohns Manville .080 PVC SD Plus MIN Membrane, 80 mil White, 10 ft x 75 ft Roll\u003c\/h1\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eThis Johns Manville PVC SD Plus membrane roll is 80 mil white, 10 ft x 75 ft, a heat-weldable thermoplastic PVC for commercial low-slope roofing. Meets ASTM D 4434, Type III. A non-wicking polyester scrim adds tensile strength, and an aramid-reinforced fastening edge is woven into full rolls. One roll per order.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-weldable PVC:\u003c\/strong\u003e Heat weldable thermoplastic PVC available in 50, 60 and 80 mil, this roll is 80 mil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASTM Type III:\u003c\/strong\u003e Meets the requirements of ASTM D 4434, Type III.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-wicking scrim:\u003c\/strong\u003e A fully integrated non-wicking reinforced polyester scrim adds tensile strength and toughness; edge sealant is not required on cut edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid-reinforced edge:\u003c\/strong\u003e Patented aramid fiber is woven into the fastening side of all full rolls of PVC membrane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e Inherently resistant to oils, air conditioning coolants, fuels and grease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy savings:\u003c\/strong\u003e White membrane provides exceptional reflectivity and emissivity for energy savings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications Table:\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJohns Manville\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 roll, 10 ft x 75 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJM PVC SD Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite, Gray (line); this item is White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 mil, 10 ft x 75 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReinforced thermoplastic PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor \/ finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNominal size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 mil x 10 ft x 75 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eASTM D 4434, Type III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage per unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 sq ft per roll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommercial low-slope single-ply roofing, especially grease- and chemical-exposed roofs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eCoverage \u0026amp; How Much You Need:\u003c\/h2\u003e\u003cp\u003eOne 10 ft x 75 ft roll covers about 750 sq ft nominal. Deduct for heat-welded laps and perimeter detailing when sizing the job.\u003c\/p\u003e\u003ch2\u003eFit and Compatibility:\u003c\/h2\u003e\u003cp\u003ePart of the JM PVC SD Plus line, designed for hot-air welded seams. Pair with JM PVC flashing, plates, fasteners and accessories sold separately.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions (FAQ):\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e One 80 mil white PVC SD Plus MIN roll, 10 ft x 75 ft.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How much does one roll cover?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e About 750 sq ft nominal before weld laps and perimeter details.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How are seams made?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The membrane is heat weldable, so seams are hot-air welded rather than glued.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Do cut edges need sealant?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No, the non-wicking reinforced scrim means edge sealant is not a requirement for cut edges.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why choose white PVC?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e White membranes provide exceptional reflectivity and emissivity for energy savings.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Is it good near kitchens or HVAC units?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eExpert Verdict — Reviewed by the SuperArbor Pro Desk\u003c\/h2\u003e\u003cp\u003eThe 80 mil thickness is the toughest option in the SD Plus line and suits roofs with grease exposure from restaurants or heavy mechanical traffic. Aramid-reinforced edges resist tear-out at fasteners. Hot-air welding gives a monolithic seam, but field welding quality depends on operator technique and equipment setup.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFollow the manufacturer's installation instructions and local building codes, and use proper fall protection when working on low-slope roofs.\u003c\/em\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eOrder the Johns Manville 80 mil white PVC SD Plus MIN membrane roll for a weldable, chemical-resistant roof.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Johns Manville","offers":[{"title":"Default Title","offer_id":67583326093679,"sku":"JM70004638","price":1425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3499\/7051\/files\/JM70004638_0.jpg?v=1790406815","url":"https:\/\/superarbor.io\/products\/johns-manville-080-pvc-sd-plus-min-membrane-80-mil-white-10-ft-x-75-ft-roll","provider":"Super Arbor","version":"1.0","type":"link"}