{"product_id":"gaf-omg-olybond500-spotshot-two-component-polyurethane-insulation-adhesive-1500-ml-two-par","title":"GAF OMG OlyBond500 SpotShot Two-Component Polyurethane Insulation Adhesive, 1500 mL Two-Part Kit","description":"\u003ch1\u003eGAF OMG OlyBond500 SpotShot Two-Component Polyurethane Insulation Adhesive, 1500 mL Two-Part Kit\u003c\/h1\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eGAF OMG OlyBond500 SpotShot is a two-component, low-rise polyurethane insulation adhesive for adhering board stock to many roof substrates in new and reroof work, including board-to-board attachment. Each kit dispenses 3\/4 in. to 1 in. beads through the portable SpotShot applicator, and one kit secures boards as the chemical cure takes hold in about 4 to 8 minutes.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid chemical cure:\u003c\/strong\u003e Boards are secured approximately 4 to 8 minutes after application, depending on temperature and weather conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-rise polyurethane:\u003c\/strong\u003e Dispensed in 3\/4 in. to 1 in. wide beads that spread to several inches while rising 3\/4 in. to 1 in. above the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable applicator:\u003c\/strong\u003e The lightweight, portable SpotShot system allows easy insulation board installation on the roof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard-to-board:\u003c\/strong\u003e Can be used to adhere insulation board to insulation board as well as to the deck or substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC formula:\u003c\/strong\u003e Uses water instead of HCFC as the blowing agent, making it low VOC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility:\u003c\/strong\u003e Compatible with most single-ply and some asphaltic systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrengthens system:\u003c\/strong\u003e Adhesive attachment strengthens the overall roof system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications Table:\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGAF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBox of 4 two-part 1500 mL kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOlyBond500 SpotShot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-component low-rise polyurethane adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor \/ finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. to 1 in. wide beads, rising 3\/4 in. to 1 in. above substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKit size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1500 mL two-part kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack quantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 kits per box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCure time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 4 to 8 minutes, depending on temperature and weather\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlowing agent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater (not HCFC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow VOC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdhering insulation board to roof substrates and insulation-to-insulation in new and reroof applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMost single-ply and some asphaltic systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eCoverage \u0026amp; How Much You Need:\u003c\/h2\u003e\u003cp\u003eApply beads 3\/4 in. to 1 in. wide that spread to several inches; place the board into the adhesive and walk it into place. Ribbons are spaced per the board type and wind requirements of the job; one 1500 mL two-part kit (sold 4 per box) covers a full board pattern for typical insulation attachment.\u003c\/p\u003e\u003ch2\u003eFit and Compatibility:\u003c\/h2\u003e\u003cp\u003eWorks with most single-ply and some asphaltic roof systems and a variety of board stocks over many roof substrates. Boards are secured by walking them into the wet beads; no fasteners or hot asphalt are required.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions (FAQ):\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in each kit?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Each kit is a 1500 mL two-part OlyBond500 adhesive cartridge set for the SpotShot applicator, sold four kits per box.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How fast does it cure?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A chemical cure secures the board approximately 4 to 8 minutes after application, depending on temperature and weather conditions.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How do I apply it?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Dispense 3\/4 in. to 1 in. wide beads, set the board into the adhesive, and walk it into place until the cure takes hold.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can it bond insulation to insulation?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, OlyBond500 can adhere insulation board to insulation board as well as to many roof substrates.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Is it VOC-compliant?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It uses water rather than HCFC as the blowing agent, so it is low VOC.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Which roof systems does it work with?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It is compatible with most single-ply and some asphaltic systems.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eExpert Verdict — Reviewed by the SuperArbor Pro Desk\u003c\/h2\u003e\u003cp\u003eOlyBond500 SpotShot is a strong choice for low-slope insulation attachment where mechanical fasteners would telegraph through thin boards or hot asphalt is impractical. Keep kits at moderate temperature before use since cure time slows in cool weather, and always walk boards into the wet beads promptly so the low-rise foam fully contacts the substrate. For thick multi-layer stacks, bond board to board with the same material rather than fastening through the stack.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eWear gloves and eye protection when handling two-component polyurethane adhesives, and follow the manufacturer's application and substrate preparation instructions for the roof system.\u003c\/em\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eOrder GAF OMG OlyBond500 SpotShot adhesive kits today for fast, strong insulation attachment on your next low-slope job.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GAF","offers":[{"title":"Default Title","offer_id":53522892063087,"sku":"OLYB500SS","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3499\/7051\/files\/ProductImage_OLYB500SS.jpg?v=1790232821","url":"https:\/\/superarbor.io\/products\/gaf-omg-olybond500-spotshot-two-component-polyurethane-insulation-adhesive-1500-ml-two-par","provider":"Super Arbor","version":"1.0","type":"link"}