A step-by-step guide to installing LifeProof vinyl plank flooring in your home.

Installing new flooring in your home is an exciting project that can add value and style to your space. If you've chosen Lifeproof flooring for your home, congratulations on a great choice! Lifeproof flooring is known for its durability, water-resistance, and ease of installation. In this comprehensive guide, we'll walk you through the process of installing Lifeproof flooring step-by-step, so you can have beautiful new floors in no time.

Before You Begin:

Before you begin installing your Lifeproof flooring, it's important to make sure you have all the necessary tools and materials. You'll need a tape measure, a utility knife, a straight edge, a tapping block, a hammer, and a saw. You'll also need underlayment if you're installing over a concrete subfloor, and adhesive if you're installing in a high-traffic area.

Step 1: Prepare the Subfloor:

Before installing your Lifeproof flooring, you'll need to prepare the subfloor. Make sure the subfloor is clean, dry, and level. If you're installing over a concrete subfloor, you'll need to install underlayment to prevent moisture from seeping up into the Lifeproof flooring.

Step 2: Measure and Cut the Lifeproof Planks:

Using a tape measure, measure the length and width of the room. Determine the square footage of the room by multiplying the length by the width. When measuring, be sure to account for any irregularities in the room, such as corners or nooks.
Using a saw and a straight edge, cut the Lifeproof planks to fit the size of the room. Leave a gap of at least ¼ inch between the Lifeproof planks and the wall to allow for expansion and contraction.

Step 3: Install the First Row:

Begin installing the first row of Lifeproof planks along the longest wall in the room. Use a tapping block and hammer to ensure each plank is securely locked in place. Use a saw to cut the last plank in the first row to fit.

Step 4: Install the Remaining Rows:

After the first row is installed, begin installing the remaining rows. Make sure to stagger the planks so the seams don't align. Use a tapping block and hammer to ensure each plank is securely locked in place.

Step 5: Install the Trim:

After all the Lifeproof planks are installed, install the trim around the edges of the room. This will cover the gaps left for expansion and contraction.

Congratulations! You've successfully installed your Lifeproof flooring. With proper care and maintenance, your new floors will look beautiful for years to come.

In conclusion, installing Lifeproof flooring is a great way to add durability and style to your home. By following these simple steps, you can have beautiful new floors in no time. Remember to properly prepare the subfloor, measure and cut the Lifeproof planks, install the planks securely, and install the trim. With these steps, you'll have a successful installation that will last for years to come.